MTech-2025

Home

Department

Officers & Staff

Academics

Innovation

International Relations

Placement

Research

Centers

Central Library

Tenders

Right to Information

Institute Newsletter

IIT(ISM) @2026; 100 Years of legacy

National Ragging Prevention Programme

CVO

BIS Corner

In Media

SC/ST Cell

Equal Opportunity Cell

Geological Museum

centenary countdown

Faculty details

Prof.Nitai Pal

Designation: Professor

Department: Electrical Engineering

Email: nitai[at]iitism[dot]ac[dot]in

Contact Number: 6205256447

Office Number: +91-326-223-5623

Personal Page: Under Construction

About Me: Dr. Nitai Pal is currently working in the Department of Electrical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad, India as a full-time Professor. He received his B.Tech. and M.Tech. degrees from the University of Calcutta, Kolkata, India in the year 1998 and 2000 respectively. He did his Ph.D. (Engg.) from the Jadavpur University, Kolkata, India in the year 2007. He has total experience of more than 24 years in teaching. Dr. Pal has 90 nos. of research publications in the journals of repute. Moreover, he has also published several books and book chapters through International and National conferences. He has completed four R&D research projects. One R&D research project is ongoing under his supervision. He is the peer reviewer of various International Journals; like IEEE, IET, Elsevier, Springer, IJCEE, IJCTE etc. Dr. Pal is the member of various international and national professional bodies like: SMIEEE, FIE, FIETE, IAENG, IACSIT, IDES, IAES, IIIE, ISTE, SSI. Twelve Indian patents have been granted and sixteen research scholars have already been awarded Ph.D. under his supervision. Eight research scholars are continuing their Ph.D. under his guidance. His research interests include application of power electronics, renewable energy systems, micro-grid, smart-grid, electric vehicles, battery charging systems etc.

Research Interest: Power Electronics, Power Systems, Renewable Energy

Curriculum
Vitae
Publications

Teaching

Courses Taught:

Basics of Electrical Engineering, Electrical Machines-I, Electrical Machines-II, Industrial Instrumentation, Advanced Machine Drives, Power Electronics, Applied Electrical Engineering, Circuit Theory, Field Theory, etc.

M.Tech. Project Guidance:

Several projects are supervised in different areas (70 Nos. Approx.)

B.Tech. Project Guidance:

Several projects are supervised in different areas

Academics

Education:

Ph.D. (Engg.) 2007 – Department of Electrical Engineering, Jadavpur University, Kolkata.

Thesis Title: Radio-frequency Mirror Inverter for Induction Cooker and the Corresponding Choice of Pan Material.

M. Tech. 2000 – Specialization: Electrical Machines & Power System, Electrical Engineering, University of Calcutta, Calcutta.

Dissertation Title: Computer Aided Performance Analysis of a Series Capacitor Compensated Extra High Voltage Transmission Line for its Efficient Operation.

B. Tech. 1998 – Discipline: Electrical Engineering, University of Calcutta, Calcutta.

Project Title: Microprocessor Based Monitoring and Controlling of Constant Speed Drive of DC Shunt Motor.

Paper / Book / Patent Published:

  1. International Journal                    : 64
  2. National Journal                           : 07
  3. International Conference              : 57
  4. National Conference                     : 25
  5. Book Published                             : 02
  6. Book Chapter Published               : 14
  7. Patent Granted, Govt. of India      : 12
  8. Patent Applied, Govt. of India      : 04
  9. Ph.D. Awarded                              : 16
  10. Total Citations                           : 2022 (Google Scholar)
  11. h-index                                      : 23 (Google Scholar)

 12. i10-index                                   : 47 (Google Scholar)

Participation in Academic Work of External Bodies:

  1. External Examiner of Ph.D. Thesis, NIT, Mizoram.
  2. External Examiner of Ph.D. Thesis, NIT, Patna.
  3. External Expert of the Doctoral Advisory Committee in Ph.D. program of the School of Electronics Engineering, Vellore Institute of Technology, Vellore, TN, w.e.f. October 2024.
  4. Expert in Screening Committee for patent filing application of the Department of Electrical Engineering, IIEST, Shibpur, w.e.f. July 2024.
  5. Board of Studies (subject expert), Department of Electrical Engineering, Ghani Khan Choudhury Institute of Engineering and Technology, Malda, WB, w.e.f. April 2024.
  6. External Examiner of Ph.D. Thesis, IIT Delhi, New Delhi.
  7. External Examiner of Ph.D. Thesis, CSIR-Central Salt & Marine Chemicals Research Institute, Gujarat at AcSIR.
  8. External Examiner of the Doctoral Committee, SRM IST, Ghaziabad, UP.
  9. External Examiner of Ph.D. Thesis, Integral University, Lucknow UP.
  10. Nominated as an expert member of the AICTE Expert Visit committee for conducting physical visit to AICTE approved Institutions/ Universities.
  11. External Member of the Research Advisory Committee (RAC) for the Ph.D. evaluations at Lovely Professional University, Punjab.
  12. Moderator of semester question papers of Swami Vivekananda University, WB.
  13. Reviewer of Fellowship and Research Grant (FRG) under UGC, New Delhi.
  14. Board of Studies (important stakeholder), EEE Department, KIET Group of Institutions, Delhi-NCR, Ghaziabad.
  15. Confidential work at UPSC.
  16. Confidential work at BPSC, Patna, Bihar.
  17. Confidential work at JPSC, Ranchi, Jharkhand.
  18. External Examiner of M.Tech. Thesis, Jawaharlal Nehru University, New Delhi.
  19. External Examiner of Ph.D. Thesis, BIT Mesra, Ranchi, Jharkhand.
  20. External Examiner of Ph.D. (Engg.) Thesis, Jadavpur University, Kolkata.
  21. External Examiner of Ph.D. Thesis, Siksha ‘O’ Anusandhan, Bhubaneswar, Odisha.
  22. External Paper Setter of Ph.D. (Engg.) Entrance Exam, Sharda University, Greater Noida, UP.
  23. External Examiner of BIT, Sindri, Dhanbad (both UG and PG Level).

24. Reviewer of the books for Higher Education: (i) Electrical and Electronics Measurements and Instrumentation–Tata McGraw Hill Education Private Limited; (ii) Electrical Machines–Tata McGraw-Hill  Publishing Company Ltd; (iii) Electrical Machines–Universities Press India Pvt. Ltd.; (iv) Power Transmission & Distribution–Pearson India; (v) Electrical Machine Design–Pearson India; (vi) Electromagnetics–SAGE Publications India Pvt Ltd; (vii) Switchgear and Protection–Pearson India; (viii) Power Electronics–McGraw-Hill Education; (ix) Electrical Machines–Cambridge University Press India; (x) GATE-EE–Wiley India Pvt. Ltd.; (xi) Electrical Machines (Bhattacharya , 3e)–McGraw-Hill  Education (India); (xii) Power Electronics –Cengage Learning.

Abroad Visit for Attending International Conferences:

  1. Dubai, UAE, during 16–18 November 2015.
  2. Tokyo, Japan, during 15–17 March 2013.
  3. Kowloon, Hong Kong during 14–16 March 2012.
  4. Suntec City, Singapore during 26–28 February 2010.

Faculty Mobility Program:

NHPC Visit; dated: 12–22 July 2022

Conference Attended:
  • Participated in three days International Conference on “Mine Ventilation and Environment for Green Mining (MVEGM-2024)”, organized by the Department of Mining Engineering, IIT (ISM), Dhanbad held at Puri, Odisha during 20–22 December 2024.
  • Act as a session chair in the 7th International Conference on Energy Systems, Drives and Automations (ESDA2024) organized by Applied Computer Technology, Kolkata during 14–15 December 2024.
  • Participated in three days national conference on “Emerging Trends in Earth Sciences: Geohazards and Resource Management (ETES-2024)”, organized by the Department of Applied Geophysics, IIT (ISM), Dhanbad during 27–29 September 2024.
  • Participated in two days PAN–IIT 6th International Conference on “Financial Markets & Corporate Finance (ICFMCF–2024)”, organized by the Department of Management Studies and Industrial Engineering, IIT (ISM), Dhanbad during 06–07 July 2024.
  • Participated in three days National Conference on “Modeling, Analysis and Simulation (MAS–2024)”, organized by the Department of Mathematics and Computing, IIT (ISM), Dhanbad during 28–30 June 2024.
  • Participated in two days International Conference on “Sustainable Development and Management Practices (ICSDMP–2024)”, organized by the Department of Management Studies and Industrial Engineering, IIT (ISM), Dhanbad during 09–10 February 2024.
  • Participated in three days International Conference on "Advances in Spectroscopic Techniques and Materials (ASTM-2024)”, organized by the Department of Physics, IIT (ISM), Dhanbad during 18–20 January 2024.
  • Participated as session chair in two days 6th International Conference on “Energy Systems, Drives and Automations (ESDA2023)”, organized by the Applied Computer Technology, Kolkata during 30–31 December 2023.
  • Participated in three days International Conference on “Safe, Smart and Sustainable Mining (3SM)”, organized by the Department of Mining Engineering, IIT (ISM), Dhanbad at Margao, Goa during 16–18 December 2023.
  • Participated in two days National Conference on Technological Advancements in Waste Management: Challenges and Opportunities–2023 (TAWMCO – 2023)”, organized by the Department of Environmental Science and Engineering, IIT (ISM), Dhanbad during 04–05 December 2023.
  • Participated in three days 5th International Conference on Recent Advances in Information Technology (RAIT-2023) organized by the Department of Computer Science and Engineering, IIT (ISM), Dhanbad during 03–05 March 2023.
  • Participated in three days 4th International Conference on Recent Advances in Information Technology (RAIT-2018) organized by the Department of Computer Science and Engineering, IIT (ISM), Dhanbad during 15–17 March 2018.
  • Participated in two days 3rd National Conference on Mining Equipment: New Technologies, Challenges and Applications (MENTCA 2018) organized by the Department of Mining Machinery Engineering, IIT (ISM), Dhanbad during 09–10 February 2018.
  • Participated in 4th International Conference on Power, Control and Embedded System (ICPCES-2017), organized by MNNIT, Allahabad during 09–11, March 2017.
  • Participated in two days National Conference on Recent Advances in Science and Engineering (RASE-2016) organized by Faculty Development Centre, Indian School of Mines, Dhanbad during 28–29 March 2016.
  • Participated in three days 3rd International Conference on Recent Advances in Information Technology (RAIT-2016) organized by the Department of Computer Science and Engineering, Indian School of Mines, Dhanbad during 03–05 March, 2016.
  • Participated in three days 2nd International Conference & Exhibition on “Industrial Engineering-2015” Dubai, UAE during 16–18 November 2015.
  • Participated in two days National Conference on Mining Equipment: New Technologies, Challenges and Applications (MENTCA 2015) organized by the Department of Mining Machinery Engineering, Indian School of Mines, Dhanbad during 09–10 October 2015.
  • Participated in three days 2nd International Conference on Engineering & Applied Science” (ICEAS 2013), at Tokyo, Japan, during 15–17 March 2013.
  • Participated in three days International MultiConference of Engineers and Computer Scientist (IMECS 2012), at The Royal Garden, 69 Mody Road, Tsimshatsui, Kowloon, Hong Kong during 14–16 March 2012.
  • Participated in three days National Seminar on “Mining Equipment – New Technologies Challenges and their Application (MENTCA–2012) organized by Department of Mechanical Engineering & Mining Machinery Engineering, Indian School of Mines, Dhanbad – 826004, Jharkhand during 19–21 January 2012.
  • Participated in two days National Seminar on “Frontiers in Electronics, Communication, Instrumentation and Information Technology (FECIT–2011) organized by Department of Electronics Engineering, Indian School of Mines, Dhanbad – 826004, Jharkhand during 03–04 November 2011.
  • National Conference cum Workshop on “Geological and Technological Facets of CBM, Shale Gas, Energy Resources and CO2 Sequestrain (CSECS2010)” organized by Department of Applied Geology, Indian School of Mines, Dhanbad-826004 dated 19–20 November 2010.
  • National Seminar on “Drills & Drilling – An Update” (D & DU – 2010) organized by Department of Mechanical Engineering & Mining Machinery Engineering, Indian School of Mines, Dhanbad – 826004, Jharkhand dated 23–24 September 2010.
  • “International Conference on Computer and Automation Engineering” (ICCAE 2010) organized by IACSIT, Sichuan University and IEEE, Computational Intelligence Society, held in Suntec City, Singapore dated 26–28 February 2010.
  • International Conference on Mine Ventilation” (9th IMVC) organized by Indian School of Mines, Dhanbad – 826004, Jharkhand held in New Delhi, India dated 10–13 November 2009.
  • National Seminar on “Crushing Screening & Conveying” (CS&C–2008) organized by Department of Mechanical Engineering & Mining Machinery Engineering, Indian School of Mines University, Dhanbad – 826004, Jharkhand dated 11–12 September 2008.
  • International Conference on “Modelling and Simulation (MS–07)”, organized by the Department of Applied Physics, University of Calcutta in association with AMSE held at The Circle, VIP Road, Kolkata dated 03–05 December 2007.
  • International Conference on “Emerging Trends in Electrical Engineering (ETEE–2007)” organized by Electrical Engineering Department, Jadavpur University, Kolkata held at Science City, Kolkata dated 12–14 January 2007.
  • National Seminar on “Condition Monitoring Overview & Advanced Techniques” (COMOAT–2006), organized by Mechanical Engineering & Mining Machinery Engineering Department, Indian School of Mines, Dhanbad dated 15–16 September 2006.
  • National Seminar on “Intelligent Tools in Electrical System” (ITES-2006) organized under CAS – Programme, UGC, Govt. of India by Electrical Engineering Department of Jadavpur University in collaboration with Power Engineering Chapter of IEEE Calcutta Section on 22nd March 2006.
  • 28th Annual Convention and Exhibition of IEEE India Council (EPIC IEEE ACE 2002) organized by IEEE Calcutta Section held at Science City, Kolkata, India dated 20–21 December 2002.
  • International Conference on “Control Instrumentation and Information Communication” (CIIC-2001) organized by The Department of Applied Physics, University of Calcutta held at Science City, Kolkata, India dated 13–15 December 2001.

Guest Speaker:
  • Delivered an expert lecture in FDP on “Unveiling the Research Process: Methodology, Problem Identification, and Simulation-Based Hardware Implementation” organized by Government Engineering College, Raipur, Chhattisgarh, held on 31st July 2023.
  • Delivered an expert lecture in workshop on “Electrical Safety in Mines and Substations”, organized by BCCL, Koyla Bhawan, Koyla Nagar, Dhanbad, held on 20th February 2019.
  • Delivered an expert lecture in one-week short term course on “Recent Trends in Intelligent Systems Design (RTISD-2019)” sponsored by TEQIP-III organized by Department of Electrical Engineering, NIT, Durgapur, WB, held on 12th January 2019.
  • Delivered an expert lecture in short term course on “Machine Vibration & Diagnostic Maintenance” (Topic - Condition Based Maintenance of Electrical Equipment, dated – 08/01/09), organized by Department of Mechanical Engineering & Mining Machinery Engineering, Indian School of Mines University, Dhanbad–826004, Jharkhand held on 05 – 09 January 2009.
  • Delivered an expert lecture in short term course on “Environment and Health Hazards and Ecological Challenges – Role of Engineers” on the occasion of 41st Annual General Meeting of the Institution of Engineers (India), Asansol Local Centre held on 02nd November 2008 at Burnpur Club, Asansol, W.B.

Refresher Course / Workshop Attended:
  • Visited Teesta-V Power Station, Sigtam, Sikkim, NHPC Ltd., dated: 12–22 July 2022.
  • Two days’ workshop on "Smart Grid and Cyber Security" organized by CPRI, Bangalore, dated 05–06 January 2017.
  • “Entrepreneurship Development Programme for Faculties” held at Science & Technology Entrepreneurs’ Park, IIT Kharagpur, dated 26th March 2009 to 04th April 2009.
  •  National Workshop on “High Voltage Engineering and its relevance to Modern Power System” (NWHE-2006) organized by Electrical Engineering Department, Bengal Engineering and Science University, Shibpur, dated 26–28 October 2006.
  • Workshop programme on “LaTex – an Introduction” organized by Department of Computer Science & Engineering and Information Technology, College of Engineering & Management, Kolaghat, Purba Medinipur, dated 18–19 July 2006.
  • “Advanced Computational Techniques in Electrical Engineering” held at Electrical Engineering Department, Jadavpur University, Kolkata in collaboration with Power Engineering Chapter, IEEE Calcutta Section, dated 03–08 July 2006.
  • “Recent Advances in Power System Under Deregulated Environment” held at College of Engineering & Management, Kolaghat, approved by AICTE and affiliated to West Bengal University of Technology and accredited by NBA, dated 05–16 July 2004.
  • “Recent Advances in Power Engineering” held at Jadavpur University, Kolkata, dated 26th May 2003 to 14th June 2003.
  •  “Frontier of Measurement and Instrumentation” held at IIT–KGP, West Medinipur, dated 05–17 May 2002.

Position

Teaching Experience:

17/08/2023 –

Till Date

Professor, Department of Electrical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad – 826004, Jharkhand, India.

29/05/2011 –

16/08/2023

Associate Professor, Department of Electrical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad – 826004, Jharkhand, India.

29/05/2008 – 28/05/2011

Assistant Professor, Department of Electrical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad – 826004, Jharkhand, India.

11/05/2007 – 28/05/2008

Sr. Lecturer (Re-designated Assistant Professor), Department of Electrical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad – 826004, Jharkhand, India.

01/10/2006 – 10/05/2007

Sr. Lecturer, Department of Electrical Engineering, College of Engineering & Management, Kolaghat, Purba Medinipur, approved by AICTE, accreditated by NBA and affiliated to West Bengal University of Technology, West Bengal, India.

08/07/2002 – 30/09/2006

Lecturer, Department of Electrical Engineering, College of Engineering & Management, Kolaghat, Purba Medinipur, approved by AICTE, accreditated by NBA and affiliated to West Bengal University of Technology, West Bengal, India.

14/02/2000 – 07/07/2002

Lecturer, Department of Electrical Engineering, Asansol Engineering College, Asansol, Burdwan, West Bengal, India.

Awards and Honors

Academic  Awards / Scholarships:
  • Recipient of 2nd best paper award for the paper (ID-28) entitled “A Novel Hybrid MPPT Approach for Tip Speed Ratio and Pitch angle control in Wind Energy Conversion System using Sea Lion – Puma Algorithm”, – published in the proceeding of the 7th International Conference on Energy Systems, Drives and Automations (ESDA2024) organized by Applied Computer Technology, Kolkata during 14–15 December 2024.
  • Recipient of 2nd best paper award for the paper (ID-55) entitled “An accurate and explainable approach towards cardiac disease detection using bidirectional long short-term memory”, – published in the proceeding of the 7th International Conference on Energy Systems, Drives and Automations (ESDA2024) organized by Applied Computer Technology, Kolkata during 14–15 December 2024.
  • Recipient of the National Scholarship Scheme of Government of India on the result of B.Sc. (Physics Honours), Part-II Exam held by Calcutta University in 1995, Ref. No. – ET/T/AW/NS/95/5041.
  • Awarded a Prize named – “Jagindranath Barman Memorial’ at the Annual Prize Distribution Ceremony, 1995, securing first position in Math (Pass) at C.U. Part-I Exam. among the students of B.Sc. Degree Course in the college Ramakrishna Mission Vidyamandira, Belur Math, Howrah, session 1992–95.
  • Awarded a Medal named – “Somnath Banerjee Memorial” at the Annual Prize Distribution Ceremony, 1996, securing first class in Physics (Honours) at C.U. Part-II Exam. among the students of B.Sc. Degree Course in the college Ramakrishna Mission Vidyamandira, Belur Math, Howrah, session 1992–95.
  • Recipient of the certificate from the ‘Sishu Utsab Samiti”, Kolaghat, securing 1st division along with 1st position among the students of ‘Kola Union High School’ in H.S. Exam–1992.

Publications

Books Published

Book Published: 02 Nos.

2017:

  1. Himanshu Sharma, Pankaj Kumar and Nitai Pal, “A Control Strategy of Hybrid Solar-Wind Energy Generation System” Lap Lambert Academic Publishing, Germany, ISBN: 978-620-2-01771-8, pp. 1-58, August 2017.

2013:

  1. Pradip Kumar Sadhu, Nitai Pal and Ananya Bhattacharya, “Design of Working Coil Using Litz Wire for Industrial Induction Heater” Lap Lambert Academic Publishing, Germany, ISBN: 978-3-659-35853-1, pp. 1-65, March 2013.

Book Chapter Published: 14 Nos.

2024:

  1. Promit Kumar Saha and Nitai Pal, “Comprehensive investigation of the architectures of single-stage switched-boost inverters” – Recent Advancements in Computational Intelligence and Design Engineering, CRC Press, 2024, chapter 47, pp. 304-317, https://doi.org/10.1201/9781003596745

2023:

  1. Manish Kumar and Nitai Pal, “Simulation and Modeling of Electrical Load Data Using Machine Learning” – Machine Learning in Information and Communication Technology, Lecture Notes in Networks and Systems 498, Springer Nature Singapore Pte Ltd. 2023, pp. 311-316, https://doi.org/10.1007/978-981-19-5090-2_28.

2022:

  1. Madhuri Saha and Nitai Pal, “Analysis, Modeling, and Forecasting of Day-Ahead Market Prices in Indian Power Exchange” – Communication and Intelligent Systems, Lecture Notes in Networks and Systems 461, Springer Nature Singapore, 2022, pp. 989-1013, https://doi.org/10.1007/978-981-19-2130-8_77.

2021:

  1. Nitai Pal and Sk Aminul Islam “A Comprehensive Analysis of Classical and Variable Step Size P&O Algorithms for MPPT Technique used in Solar Photovoltaic System” – New Frontiers in Communication and Intelligent Systems, Computing & Intelligent Systems, SCRS, India, 2021, pp. 595–603, https://doi.org/10.52458/978-81-95502-00-4-61.
  2. Faizan Arif Khan, Nitai Pal and Syed Hasan Saeed, “Stand-alone hybrid system of solar photovoltaics/wind energy resources: an eco-friendly sustainable approach – Advances in Nonlinear Dynamics and Chaos (ANDC), [Renewable Energy Systems - Modeling, Optimization and Control, Elsevier, Academic Press], ISBN: 978-0-12-820004-9, Chapter 31, September 2021, pp. 687-705, DOI: 10.1016/B978-0-12-820004-9.00030-9.
  3. Pankaj Kumar, Nitai Pal and Mohit Kumar, “Hybrid operational deployment of renewable energy—a distribution generation approach” – Advances in Nonlinear Dynamics and Chaos (ANDC), [Design, Analysis and Applications of Renewable Energy Systems, Elsevier, Academic Press], ISBN: 978-0-12-824555-2, Chapter 26, September 2021, pp. 627-643, DOI: 10.1016/B978-0-12-824555-2.00020-4.
  4. Boral S., Pal N. (2021), LCL Topology-Based Wireless Charging Unit for Electric Vehicles. In: Mohapatro S., Kimball J. (eds) Proceedings of Symposium on Power Electronic and Renewable Energy Systems Control (PERESC2020), organized by IIT Bhubaneswar, Lecture Notes in Electrical Engineering, Vol. 616, pp. 3-15, Springer, Singapore, Print ISBN: 978-981-16-1977-9, Online ISBN: 978-981-16-1978-6, DOI: 10.1007/978-981-16-1978-6_1.
  5. Mandal A., Pal N. (2021), Purification of Harvested Rainwater Using Solar PV-Based Pulsed Corona Discharge. In: Mohapatro S., Kimball J. (eds) Proceedings of Symposium on Power Electronic and Renewable Energy Systems Control (PERESC2020), organized by IIT Bhubaneswar, Lecture Notes in Electrical Engineering, Vol. 616, pp. 477-487, Springer, Singapore, Print ISBN: 978-981-16-1977-9, Online ISBN: 978-981-16-1978-6, DOI: 10.1007/978-981-16-1978-6_41.
  6. Nimish Kumar, Promit Kumar Saha, Nitai Pal and Neha Kumari, “Effect of Modulation Index of Nonlinearly Decreasing Inertia Weight on the Performance of PSO Algorithm for Solving ELD Problems” – Advances in Smart Grid Automation and Industry 4.0, Springer, Singapore, Vol. 693, May 2021, pp. 767-775, Print ISBN 978-981-15-7674-4, Online ISBN 978-981-15-7675-1, DOI: 10.1007/978-981-15-7675-1 (SCOPUS-Indexed).

2020:

  1. Nitai Pal and Faizan Arif Khan, “Hydro Power Technology” – Academic Press, an imprint of Elsevier, pp. 91-120, September 2020, ISBN: 978-0-12-822989-7.
  2. Pankaj Kumar, Kumar Avinash Chandra, Sanjay Patel, Nitai Pal, Mohit Kumar and Himanshu Sharma, “Operational Challenges towards Deployment of Renewable Energy” – IntechOpen Limited, London, UK, pp. 1-17, September 2020, ISBN: 978-1-78984-284-5, DOI: 10.5772/intechopen.92041.
  3. A. Halder, N. Pal and D. Mondal, "Implications of Nonlinear Control over Traditional Control for Alleviating Power System Stability Problem" – Intelligence Enabled Research, Springer, Singapore, pp. 83-95, 2020, Print ISBN: 978-981-15-2020-4, Online ISBN: 978-981-15-2021-1, DOI: 10.1007/978-981-15-2021-1_10 (SCOPUS-Elsevier Indexed).

2015:

  1. Palash Pal, Pradip Kumar Sadhu, Nitai Pal and Prabir Bhowmik, “A New Heat Treatment Topology for Reheating of Blood Tissues After Open Heart Surgery” – Advancements of Medical Electronics, Springer Link, India, DOI 10.1007/978-81-322-2256-9_10, Print ISBN 978-81-322-2255-2, Online ISBN 978-81-322-2256-9, Book Part – Part II, pp. 101-108, January 2015.

2012:

1. Dola Sinha, Pradip Kumar Sadhu and Nitai Pal, “Design of an Induction Heating Unit Used in Hyperthermia Treatment” – Advances in Therapeutic Engineering, CRC Press, Taylor & Francis Group, ISBN: 978-1-4398-7173-7, Chapter 11, pp. 215-266, October 2012.

List Of Research Publications (only in Peer-reviewed Journals)

International Journal: 64 Nos. (Q=44: Q1=14, Q2=10, Q3=10, Q4=10)

2024:

  1. Abhay Chhetri, Devender Kumar Saini, Monika Yadav and Nitai Pal, “Performance Analysis of Machine Learning Algorithms for Estimation of EV Penetration”, –Microsystem Technologies, Springer-Nature, ISSN: 1432-1858, https://doi.org/10.1007/s00542-024-05804-x, pp. 1-15, October 2024 (SCIE; I.F: 1.6 – Q3).
  2. Promit Kumar Saha, Nitai Pal, Faizan A. Khan and Aftab Alam, “Modelling of small signals in MISO DC-DC converters for hybrid energy sources”, –Microsystem Technologies, Springer-Nature, ISSN: 1432-1858, https://doi.org/10.1007/s00542-024-05777-x, pp. 1-9, October 2024 (SCIE; I.F: 1.6 – Q3).9().,-volV)(0123456789().,-volV)
  3. Ashiwani Yadav, Nitai Pal, Faizan A. Khan, R S Parihar, Arsh Khan, Shekhar Solanki, Dewashri Pansari, Poorva Sharma, Karuna Yadav, “Comparative Assessment of Various MPPT Algorithms for Solar Photovoltaic Systems under Dynamic Shading Conditions”, –Microsystem Technologies, Springer-Nature, ISSN: 1432-1858, https://doi.org/10.1007/s00542-024-05746-4, pp. 1-11, August 2024 (SCIE; I.F: 1.6 – Q3).
  4. Isarar Ahamad, Faizan A Khan, Arun K Yadav and Nitai Pal, Vishal S Chandel, Aftab Yaseen, Ijtaba S Khan, Mahfooz Ahmad, “Performance Assessment of Solar Energy Driven Cascaded H-Bridge Multilevel Inverters”, –Microsystem Technologies, Springer-Nature, ISSN: 1432-1858, https://doi.org/10.1007/s00542-024-05748-2, pp. 1-9, August 2024 (SCIE; I.F: 1.6 – Q3).
  5. Devender Kumar Saini, Monika Yadav and Nitai Pal, “Optimal Allocation of Distributed Energy Resources to Cater the Stochastic E‑vehicle Loading and Natural Disruption in Low Voltage Distribution Grid”, –Scientific Reports, ISSN: 2045-2322, https://doi.org/10.1038/s41598-024-67927-5 pp. 1-33, July 2024 (SCIE; I.F: 4.3 – Q1).
  6. Faizan A. Khan, Saad Mekhilef, Vigna K. Ramachandaramurthy, Nur Fadilah Abd Aziz, Nitai Pal, Aftab Yaseen, Ashiwani Yadav, M. Asim and Obaid Alshammari, “Design and Development of Grid Independent Integrated Energy System for Electric Vehicle Charging Stations at Different Locations in Malaysia”, –Energy, Elsevier, ISSN: 0360-5442, https://doi.org/10.1016/j.energy.2024.131686, pp. 1-23, May 2024 (SCI; I.F: 9.0 – Q1).
  7. Asim Halder, Nitai Pal and Debasish Mondal, “Design of Optimal Controller for Static Compensator via Hamiltonian Formalism for the Multimachine System”, –Sadhana- Indian Academy of Sciences, Springer Link, ISSN: 0256-2499, https://doi.org/10.1007/s12046-024-02462-7, Vol. 49, No. 182, pp. 1-14, May 2024 (SCIE; I.F: 2.012 – Q3).
  8. Jagannath Patra and Nitai Pal, “Voltage Sag Assessment and Classification Model via H-Huang Transform, The Remora Optimization Approach, and the Persistent Hope Field Neural Network”, –Journal of Intelligent & Fuzzy Systems, ISSN: 1064-1246, 1875-8967, accepted on January 2024 (SCIE; I.F: 2.00 – Q4).

2023:

  1. Arunima Mahapatra and Nitai Pal, “Comprehensive Study on Sizing of Hybrid Renewable Energy System using Commercial Software”, –Journal of Mines, Metals and Fuels, ISSN: 0022-2755, https://doi.org/10.18311/jmmf/2023/43192 Vol. 71, Issue. 12A, pp. 47-53, December 2023 (SCOPUS Indexed).
  2. Deepti Singh, Nitai Pal and S. K. Sinha, “Technical Investigation on Operational Challenges of Large-scale PV Integration and Opportunities with Market Restructuring, Storages, Green Corridors, and AI”, –Microsystem Technologies, Springer-Nature, ISSN: 1432-1858, https://doi.org/10.1007/s00542-023-05556-0, pp. 1-14, November 2023 (SCIE; I.F: 2.012 – Q3).
  3. Jagannath Patra, Nitai Pal, Harish Chandra Mohanta, Reynah Akwafo and Heba G. Mohamed, “A Novel Approach of Voltage Sag Data Analysis Stochastically: Study, Representation, and Detection of Region of Vulnerability”, –Sustainability, MDPI, ISSN: 2071-1050, https://doi.org/10.3390/su15054345, Vol. 15, No. 5, pp. 1-29, February 2023 (SCIE; I.F: 4.089 – Q2).
  4. Manish Kumar and Nitai Pal, “Machine Learning-Based Electric Load Forecasting for Peak Demand Control in Smart Grid” –Computers, Materials & Continua, ISSN: 1546-2218, 1546-2226 https://doi.org/10.32604/cmc.2023.032971, Vol. 74, No. 3, pp. 4785-4799, 2023 (SCIE; I.F: 3.860 – Q2).

2022:

  1. Monika Yadav, Nitai Pal and Devender Kumar Saini, “Low Voltage Ride Through Capability for Resilient Electrical Distribution System Integrated with Renewable Energy Resources”, – Energy Reports, Elsevier, ISSN: 2352-4847, https://doi.org/10.1016/j.egyr.2022.12.023, Vol. 9, pp. 833-858, December 2022 (SCIE; I.F: 5.258 – Q2).
  2. Jagannath Patra and Nitai Pal, “A Mathematical Approach of Voltage Sag Analysis Incorporating Bivariate Probability Distribution in a Meshed System”, – Energies, MDPI, ISSN: 1996-1073, https://doi.org/10.3390/en15207592, Vol. 15, No. 20, pp. 1-19, October 2022 (SCIE; I.F: 3.252 – Q3).
  3. Faizan A. Khan, Nitai Pal, Syed. H. Saeed and Ashiwani Yadav “Modelling and Techno-Economic analysis of standalone SPV/Wind hybrid renewable energy system with lead-acid battery technology for rural applications”, – Journal of Energy Storage, Elsevier, ISSN: 2352-152X, https://doi.org/10.1016/j.est.2022.105742, Vol. 55, pp. 1-23, September 2022 (SCIE; I.F: 9.0 – Q1).
  4. Faizan A. Khan, Nitai Pal, Syed. H. Saeed and Ashiwani Yadav “Techno-economic analysis and feasibility valuation of standalone solar Photovoltaic/Wind Turbine hybrid energy system with various storage techniques and different locations in India”,
    –Energy Conversion and Management, Elsevier, ISSN: 0196-8904, https://doi.org/10.1016/j.enconman.2022.116217, Vol. 270, pp. 1-22, September 2022 (SCIE; I.F: 11.533 – Q1).
  5. Deepti Singh, Nitai Pal, S. K. Sinha and B. Singh, “Allocation of Reserved Green Energy Transmission Corridors to Secure Power Purchase Agreements in Smart Power Networks during Congestion Management”, – Electric Power Systems Research, Elsevier, ISSN: 0378-7796, https://doi.org/10.1016/j.epsr.2022.108006, Vol. 209, pp. 1-15, April 2022 (SCIE; I.F: 3.499 – Q2).
  6. Nimish Kumar and Nitai Pal, “Location and Orientation based Performance Analysis of 4.98 kWp Solar Photovoltaic System for Isolated Indian Islands”, – Sustainable Energy Technologies and Assessments, Elsevier, ISSN: 2213-1388, https://doi.org/10.1016/j.seta.2022.102138, Vol. 52, pp. 1-14, March 2022 (SCIE; I.F: 5.353 – Q2).
  7. Pankaj Kumar, Nitai Pal and Himanshu Sharma, “Optimization and techno-economic analysis of a solar photo-voltaic/biomass/diesel/battery hybrid off-grid power generation system for rural remote electrification in eastern India”, – Energy, Elsevier, ISSN: 0360-5442, https://doi.org/10.1016/j.energy.2022.123560, Vol 247, pp. 1-17, February 2022 (SCI; I.F: 8.9 – Q1).

2021:

  1. Yaduvir Singh and Nitai Pal, “Reinforcement learning with fuzzified reward approach for MPPT control of PV systems”, – Sustainable Energy Technologies and Assessments, Elsevier, ISSN: 2213-1388, https://doi.org/10.1016/j.seta.2021.101665, Vol. 48, pp. 1-11, December 2021 (SCIE; I.F: 5.353 – Q2).
  2. Pankaj Kumar, Nitai Pal and Himanshu Sharma, “Techno-economic analysis of solar photo-voltaic/diesel generator hybrid system using different energy storage technologies for isolated islands of India”, – Journal of Energy Storage, Elsevier, ISSN: 2352-152X, https://doi.org/10.1016/j.est.2021.102965, Vol. 41, pp. 1-22, July 2021 (SCIE; I.F: 8.907 – Q1).
  3. Monika Yadav, Nitai Pal and Devender Kumar Saini, "Resilient Electrical Distribution Grid Planning Against Seismic Waves Using Distributed Energy Resources and Sectionalizers: An Indian's Urban Grid Case Study", – Renewable Energy, Elsevier, ISSN: 0960-1481, https://doi.org/10.1016/j.renene.2021.06.071, Vol. 178, pp. 241-259, June 2021 (SCI; I.F: 8.001 – Q1).
  4. Faizan A. Khan, Nitai Pal and Syed H. Saeed, “Optimisation and Sizing of SPV/Wind Hybrid Renewable Energy System: A Techno-Economic and Social Perspective”, – Energy, Elsevier, ISSN: 0360-5442, https://doi.org/10.1016/j.energy.2021.121114, Vol. 233, pp. 1-21, June 2021 (SCI; I.F: 7.147 – Q1).
  5. Pankaj Kumar, Mohit Kumar and Nitai Pal, “An Efficient Control Approach of Voltage and Frequency Regulation in an Autonomous Microgrid”, – Rev. Roum. Sci. Techn.–Électrotechn. et Énerg., ISSN: 0035-4066, Vol. 66, No. 1, pp. 33–39, April 2021 (SCIE; I.F: 0.443 – Q4).

2020:

  1. Pankaj Kumar, Nitai Pal and Himanshu Sharma, “Performance analysis and evaluation of 10 kWp solar photovoltaic array for remote islands of Andaman and Nicobar”, – Sustainable Energy Technologies and Assessments, Elsevier, ISSN: 2213-1388, https://doi.org/10.1016/j.seta.2020.100889, Vol. 42, pp. 1–14, October 2020, (SCIE; I.F: 7.1 – Q1).
  2. Monika Yadav, Nitai Pal and Devender Kumar Saini, “Microgrid control, storage, and communication strategies to enhance resiliency for survival of critical load”, – IEEE Access, IEEE, ISSN: 2169-3536, DOI: 10.1109/ACCESS.2020.3023087, Vol. 8, pp. 169047-169069, 2020 (SCIE; I.F: 3.367 – Q2).
  3. Asim Halder, Nitai Pal and Debasish Mondal, “Higher Order Sliding Mode STATCOM Control for Power System Stability Improvement”, – Mathematics and Computers in Simulation, Elsevier, ISSN: 0378-4754, DOI: 10.1016/j.matcom.2020.04.033, Vol. 177, pp. 244-262, 2020 (SCI; I.F: 2.463 – Q1).
  4. Yaduvir Singh, Nitai Pal, “Obstacles and comparative analysis in the advancement of photovoltaic power stations in India”, – Sustainable Computing: Informatics & Systems, Elsevier, ISSN: 2210-5379, DOI: 10.1016/j.suscom.2020.100372, Vol. 25, pp. 1-8, March 2020 (SCIE; I.F: 2.798 – Q2).

2019:

  1. A. Kumari, J. Patra, N. Pal and N. Kumar, “Impact of Solar Panel on the Transformer Performance: A Case Study”, – Iranian Journal of Science and Technology, Transactions of Electrical Engineering–Springer Nature, ISSN: 2228-6179, DOI: 10.1007/s40998-019-00300-9, Vol. 43, Issue 4, pp. 1–10, December 2019 (SCIE; I.F: 0.6 – Q4).
  2. Yaduvir Singh and Nitai Pal, “Renewable Energy-Based Hybrid System” – Advances in Interdisciplinary Engineering, Lecture Notes in Mechanical Engineering–Springer Nature, Singapore, ISSN 2195-4356, DOI:10.1007/978-981-13-6577-5_67, pp. 693-702, 2019 (SCOPUS-Elsevier Indexed).
  3. Partha Sarothi Sikder, Nitai Pal, Kota Sunil Patro, “A Modeling of Stand-alone Solar Photo-Voltaic System for Rural Electrification Purposes”, – Rev. Roum. Sci. Techn.–Électrotechn. et Énerg., ISSN: 0035-4066, Vol. 64, No. 3, pp. 241–246, September 2019 (SCIE; I.F: 1.114 – Q4).
  4. Pankaj Kumar, Himanshu Sharma, Nitai Pal, Pradip Kumar Sadhu, “Comparative Assessment and Obstacles in the Advancement of Renewable Energy in India and China”, – Problemy Ekorozwoju – Problems of Sustainable Development, ISSN: 1895-6912, Vol. 14, No. 2, pp. 191-200, 2019 (SSCI; I.F: 0.577 – Q4).
  5. Chandrakesh Shukla and Nitai Pal, “Emissions and energy metrics analysis in current Indian roof top photo voltaic market”, – International Journal of Ambient Energy–Taylor & Francis, ISSN: 0143-0750(Print) 2162-8246(Online), DOI: 10.1080/01430750.2019.1611651, pp. 1–7, May 2019 (ESCI).
  6. Yaduvir Singh and Nitai Pal “Performance Analysis of Control Techniques for Micro Power System using Hybrid Approach” – IOP Conf. Series: Materials Science and Engineering–IOP Publishing, ISSN: 1757-8981, DOI:10.1088/1757-899X/691/1/012029, pp. 1-22, 2019 (SCOPUS-Elsevier Indexed).
  7. Partha Sarothi Sikder, Nitai Pal, “Feasibility assessment of distributed generation systems in Sagar Island, West Bengal, India”, – Current Science, ISSN: 0011-3891, DOI: 10.18520/cs/v116/i8/1381-1386, Vol. 116, No. 8, pp. 1381–1386, April 2019. (SCI & SCIE; I.F: 0.883 – Q3).
  8. Partha Sarothi Sikder, Nitai Pal, “Modeling of an intelligent battery controller for standalone solar-wind hybrid distributed generation system”, – Journal of King Saud University–Engineering Sciences, ISSN: 1018-3639, DOI: 10.1016/j.jksues.2019.02.002, Vol. 31, No. 3, 2019, pp. 1–10. (SCOPUS-Elsevier Indexed Journal).

2018:

  1. P. Kumar, P. S. Sikder and N. Pal, “Biomass fuel cell based distributed generation system for Sagar Island”, – Bulletin of the Polish Academy of Sciences – Technical Sciences, ISSN: 0239-7528, E-ISSN: 2300-1917, DOI: 10.24425/124282, Vol. 66, No. 5, pp. 665–674, 2018 (SCIE; I.F: 1.361 – Q3).
  2. Nimish Kumar, Nitai Pal, “The Existence of Barriers and Proposed Recommendations for the Development of Renewable Energy in Indian Perspective”, – Environment, Development and Sustainability–Springer Nature, ISSN 1387-585X, DOI: 10.1007/s10668-018-0284-y, Vol 22, pp. 2187–2205, October 2018 (SCIE; I.F: 3.219 – Q2).
  3. Ashiwani Yadav, Nitai Pal, Jagannath Patra, Monika Yadav, “Strategic planning and challenges to the deployment of renewable energy technologies in the world scenario: its impact on global sustainable development”, – Environment, Development and Sustainability–Springer Nature, ISSN: 1387-585X, DOI 10.1007/s10668-018-0202-3, Vol 22, pp. 297–315, June 2018 (SCIE; I.F: 3.219 – Q2).
  4. Faizan A. Khan, Nitai Pal and Syed H. Saeed, “Review of solar photovoltaic and wind hybrid energy systems for sizing strategies optimization techniques and cost analysis methodologies”, – Renewable and Sustainable Energy Reviews–Elsevier, ISSN 1364-0321, https://doi.org/10.1016/j.rser.2018.04.107, Vol. 92, pp. 937–947, April 2018 (SCIE; I.F: 10.556 – Q1).
  5. Avijit Chakraborty, Pradip Kumar Sadhu, Arijit Chakrabarti, Amrik Basak, Nitai Pal, “Asymmetrical Duty Cycle Phase-Shifted Dual Output Induction Cooker”, – Rev. Roum. Sci. Techn –Électrotechn. et  Énerg, ISSN: 0035-4066, Vol. 63, No. 1, pp. 65-70, 2018 (SCIE; I.F: 1.114 – Q4).
  6. Prakhar Sharma, Pankaj Kumar, Himanshu Sharma, Nitai Pal, "Closed Loop Controlled Boost Converter using a PID Controller for Solar Wind Power System Installation", – International Journal of Engineering & Technology, ISSN: 2227-524X, DOI: 10.14419/ijet.v7i2.8.10420, 7(2.8), pp. 255-260, 2018  (SCOPUS Indexed Journal).
  7. Partha Sarothi Sikder, Nitai Pal, “A Comparison between Directly Connected and MPPT Connected Solar Powered Water Pumping System using PMDC Motor”, – Journal of Power Technologies, Vol. 98, No. 1, 2018, ISSN 2038-4187, pp. 80-88 (ESCI under Thomson Reuters).
  8. Prabhat Chandra Ghosh, Pradip Kumar Sadhu, Ankita Ghosh, Nitai Pal, “Nanocrystallines as core materials for contactless power transfer (CPT)”, – Journal of Power Technologies, Vol. 98, No. 1, 2018, ISSN 2038-4187, pp. 20-29 (ESCI under Thomson Reuters).
  9. Himanshu Sharma, Pankaj Kumar, Nitai Pal, Pradip Kumar Sadhu, “Problems in the Accomplishment of Solar and Wind Energy in India”, – Problemy Ekorozwoju–Problems of Sustainable Development, ISSN: 1895-6912, Vol.13, No. 1, pp. 41-48, 2018 (SSCI; I.F: 0.577 – Q4).
  10. Asim Halder, Nitai Pal, Debasish Mondal, “Transient Stability Analysis of a Multimachine Power System with TCSC Controller–A Zero Dynamic Design Approach”, – Electrical Power and Energy Systems– Elsevier, ISSN 0142-0615, http://dx.doi.org/10.1016/j.ijepes.2017.10.030, Vol. 97, pp. 51-71, 2018 (SCIE; I.F: 4.418 – Q1).

2017:

  1. Partha Sarothi Sikder, Nitai Pal, “Incremental Conductance based Maximum Power Point Tracking Controller using Different Buck-Boost Converter for Solar Photovoltaic System”, – Rev. Roum. Sci. Techn.– Électrotechn. et  Énerg., ISSN: 0035-4066, Vol. 62, No. 3, pp. 269-275, April 2017 (SCIE; I.F: 1.114 – Q4).

  1. Avijit Chakraborty, Debabrata Roy, Titas Kumar Nag, Pradip Kumar Sadhu, Nitai Pal, “Open Loop Power Control of a Two-Output Induction Heater”, – Rev. Roum. Sci. Techn.– Électrotechn. et Énerg., ISSN: 0035-4066, Vol. 62, No. 1, pp. 48–54, 2017 (SCIE; I.F: 1.114 – Q4).
  2. Prabhat Chandra Ghosh, Pradip Kumar Sadhu, Ankita Ghosh, Nitai Pal, “A new circuit topology using Z-source resonant inverter for high power contactless power transfer applications”, – Archives of Electrical Engineering (AEE), ISSN: 1427-4221, e-ISSN: 2300-2506, DOI 10.1515/aee-2017-0064, Vol. 66, No. 4, pp. 843-854, 2017 (ESCI under Thomson Reuters).
  3. Himanshu Sharma, Nitai Pal, Pankaj Kumar, Ashiwani Yadav, “A Control Strategy of Hybrid Solar-Wind Energy Generation System”, – Archives of Electrical Engineering (AEE), ISSN: 1427-4221, e-ISSN: 2300-2506, DOI 10.1515/aee-2017-0018, Vol. 66, No. 2, pp. 241-251, 2017 (ESCI under Thomson Reuters).

2016:

  1. Ananyo Bhattacharya, Kaushik Sit, Pradip Kumar Sadhu, Nitai Pal, “A Novel Circuit Topology of Modified Switched Boost Hybrid Resonant Inverter Fitted Induction Heating Equipment”, – Archives of Electrical Engineering (AEE), ISSN: 1427-4221, e-ISSN: 2300-2506, DOI 10.1515/aee-2016-0057, Vol. 65 (4), pp. 815-826, 2016 (ESCI under Thomson Reuters).
  2. Ananyo Bhattacharya, Pradip Kumar Sadhu, Aritra Bhattacharyya, Nitai Pal, “Voltage Controlled Hybrid Resonant Inverter–An Essential Tool for Induction Heated Equipment”, – Rev. Roum. Sci. Techn. – Électrotechn. et Énerg., ISSN: 0035-4066, Vol. 61, no. 3, pp. 273-277, 2016 (SCIE; I.F: 1.114 – Q4).
  3. Avijit Chakraborty, Pradip Kumar Sadhu, Kallol Bhaumik, Palash Pal, Nitai Pal, “Performance Analysis of High frequency Parallel Quasi Resonant Inverter Based Induction Heating System” – International Journal of Electrical and Computer Engineering (IJECE), Vol.6, No. 2, 2016 (SCOPUS Indexed Journal).
  4. Avijit Chakraborty, Pradip Kumar Sadhu, Kallol Bhaumik, Palash Pal, Nitai Pal, “Design and Implementation of A PV Powered Tri-Cycle”, – International Journal of Electrical and Computer Engineering (IJECE) (ISSN: 2088-8708, DOI: 10.11591/ijece.v6i2.8034), Vol. 6, No. 2, pp. 447-457, 2016 (SCOPUS Indexed Journal).

2015:

  1. Himanshu Sharma, Nitai Pal, Yaduvir Singh and Pradip Kumar Sadhu, “Development and Simulation of Stand-Alone Photovoltaic Model Using Matlab/Simulink”, – International Journal of Power Electronics and Drive System (IJPEDS), ISSN: 2088-8694, Vol. 6, No. 4, pp. 703-711, December 2015 (SCOPUS Indexed Journal).
  2. Alok Kumar Shrivastav, Pradip Kumar Sadhu, Ankur Ganguly and Nitai Pal, “A Novel Transient Current Limiter Based on Three-Phase Thyristor Bridge for Y-yg Transformers” – International Journal of Power Electronics and Drive System (IJPEDS), ISSN: 2088-8694, Vol. 6, No. 4, pp. 747-758, December 2015. (SCOPUS Indexed Journal).
  3. Suprava Chakraborty, Pradip Kumar Sadhu and Nitai Pal, “Technical Mapping of Solar PV for ISM-an Approach Toward Green Campus” – Energy Science and Engineering, published by the Society of Chemical Industry and John Wiley & Sons Ltd., ISSN: 2050-0505, DOI: 10.1002/ese3.65, Vol. 3, No. 3, pp. 196–206, May 2015 (SCIE; I.F: 3.553 – Q3).
  4. Debabrata Roy, Pradip Kumar Sadhu and Nitai Pal, “Reduction of Harmonics Contained in the Input Power Supply - Dynamic Tool for Current Source Full-Bridge Inverter Based Induction Heater”, – PRZEGLĄD ELEKTROTECHNICZNY, Polish scientific journals, ISSN 0033-2097, Vol. 91 No. 4, pp. 123-126, 2015 (SCOPUS Indexed Journal).
  5. Nibedita Das, Nitai Pal, Sadhu K. Pradip, “Economic cost analysis of LED over HPS flood lights for an efficient exterior lighting design using solar PV”, – Building and Environment – Elsevier, ISSN 0360-1323, DOI: 10.1016/j.buildenv.2015.03.005, Vol. 89, pp. 380-392, 2015 (SCIE; I.F: 5.459 – Q1).
  6. Soumya Das, Pradip Kumar Sadhu, Nitai Pal, Gourav Majumdar and Saswata Mukherjee, “Solar Photovoltaic Powered Sailing Boat Using Buck Converter”, – International Journal of Power Electronics and Drive System (IJPEDS), ISSN: 2088-8694, Vol. 6, No. 1, pp. 129-136, March 2015 (SCOPUS Indexed Journal).
  7. Pradip Kumar Sadhu, Palash Pal, Nitai Pal and Sourish Sanyal, “Selection of Power Semiconductor Switches in M.H.B.R.I. Fitted Induction Heater for Less Harmonic Injection in Power Line”, – International Journal of Power Electronics and Drive System (IJPEDS), ISSN: 2088-8694, Vol. 6, No. 1, pp. 121-128, March 2015 (SCOPUS Indexed Journal).

2014:

  1. Suprava Chakraborty, Pradip Kumar Sadhu, Nitai Pal, “New Location Selection Criterions for Solar PV Power Plant”, – International Journal of Renewable Energy Research (IJRER), ISSN: 1309-0127, Vol.4, No.4, pp. 1020-1030, 2014 (ESCI under Thomson Reuters).
  2. Pradip Kumar Sadhu Debabrata Roy, Nitai Pal, Sourish Sanyal, “Selection of Appropriate Semiconductor Switches for Induction Heated Pipe-Line using High Frequency Full Bridge Inverter”, – International Journal of Power Electronics and Drive System (IJPEDS), ISSN: 2088-8694, Vol. 5, No. 1, pp. 112–118, July 2014 (SCOPUS Indexed Journal).

2013:

  1. Dola Sinha, Pradip Kumar Sadhu, Nitai Pal and Nirmal Baran Hui, “Genetic neural-based modeling of AC resistance of heating coil used for high-frequency inverter-fed induction cooker”, – Neural Computing & Application (Springer), ISSN: 0941-0643, Vol. 22, No. 7-8, pp. 1379 – 1388, Jun 2013. (SCIE; I.F: 4.213 – Q1).

National Journal: 07 Nos.

2011:

  1. Pradip Kumar Sadhu, Nitai Pal, Dola Sinha and Tarun Kumar Chatterjee, “A Comparative Survey on High Efficient Clean Heat Production through Microwave Oven and Induction Cooker”, – Industrial Engineering Journal of Indian Institution of Industrial Engineering, Navi Mumbai, Vol. II & Issue No. 23, pp. 08-12, May 2011.

2010:

  1. R. P. Gupta, Dr. U. Prasad, Dr. P. K. Sadhu, Dr. N. Pal, “Efficient Lighting System for Underground Coal Mines using LED”, – Journal of Institution of Engineers (I) - Springer, ISSN: 2250-2106 (print version), Mining Engineering Division, Vol. 91, pp. 21-24, August 2010.
  2. N. Pal, P. K. Sadhu, Dola Sinha, “An energy efficient MCT based H.F. inverter for operating CFL from solar PV charged batteries”, – IEEMA Journal, Vol 1, No 11, pp. 84-88, July 2010.

2009:

  1. N. Pal, P. K. Sadhu, R. N. Chakrabarti, “Choice of Pan Material in Radio-frequency Mirror Inverter Induction Cooker”, – Journal of Institution of Engineers (I) - Springer, ISSN: 2250-2106 (print version), Vol 89, pp. 09-18, March 2009.

2006:

  1. P. K. Sadhu, Nitai Pal, Rupendranath Chakrabarti and D. K. Mittra, “A dynamic model for the simulation of induction cooktop”, – Industrial Engineering Journal of Indian Institution of Industrial Engineering, Navi Mumbai, Vol. XXXV, No 6, pp. 37-41, June 2006.
  2. N. Pal, P. K. Sadhu and R. N. Chakrabarti, “A Comparative Study of HF Mirror Inverter for Induction Cooker through Real-time and PSPICE Simulation”, – Journal of Institution of Engineers (I) - Springer, ISSN: 2250-2106 (print version) Vol. 86, pp. 268-274, March 2006.

2005:

1. Nitai Pal, P. K. Sadhu and Rupendranath Chakrabarti, “Electromagnetic and radio frequency interferences suppressor for industrial induction heating equipment”, – Industrial Engineering Journal of Indian Institution of Industrial Engineering, Navi Mumbai, Vol. XXXIV, No 11, pp. 12-14, November 2005.

Papers in conference abstract volumes / presented

International Conference: 57 Nos.

2024:

  1. Pankaj Sarkar, Arnab Ghosh, Nitai Pal, Sudipta Chakraborty and Faizan A Khan, “Gravity Battery: A Scalable Solution for Renewable Energy Storage in Mining Applications”, – published in the proceeding of the International Conference on Mine Ventilation and Environment for Green Mining (MVEGM-2024) organized by Department of Mining Engineering, IIT(ISM) Dhanbad held at Puri, Odisha, during 20–22 December 2024.
  2. Promit Kumar Saha, Nitai Pal, Faizan A. Khan and Aftab Alam, “EV Battery Charging System and Impact of Uncoordinated Charging on Distribution Network”, – published in the proceeding of the 7th International Conference on Energy Systems, Drives and Automations (ESDA2024) organized by Applied Computer Technology, Kolkata during 14–15 December 2024.
  3. Dilip Kumar, Rammanohar Lohia, Yogesh Kumar Chauhan, Ajay Shekhar Pandey and Nitai Pal, “A Novel Hybrid MPPT Approach for Tip Speed Ratio and Pitch angle control in Wind Energy Conversion System using Sea Lion – Puma Algorithm”, – published in the proceeding of the 7th International Conference on Energy Systems, Drives and Automations (ESDA2024) organized by Applied Computer Technology, Kolkata during 14–15 December 2024.
  4. Prabhat Ranjan Sarkar, Ravi Shanker, Md Nishat Anwar, Faizan Arif Khan and Nitai Pal, “Climatic Influence Analytics on Solar PV and EV Charging in Grid Connected Networks”, – published in the proceeding of the 7th International Conference on Energy Systems, Drives and Automations (ESDA2024) organized by Applied Computer Technology, Kolkata during 14–15 December 2024.
  5. Sudheer Kumar Singh, Km Alka, Shivi Chaturvedi, Hrishabh Prajapati, Nitai Pal, Faizan A. Khan and Ranjana Singh, “Implementing and Analyzing Machine Learning Models for Early Diabetes Detection: A Methodological Approach using Survey-based Data”, – published in the proceeding of the 7th International Conference on Energy Systems, Drives and Automations (ESDA2024) organized by Applied Computer Technology, Kolkata during 14–15 December 2024.
  6. Jagannath Patra, Ashiwani Yadav, Nitai Pal, Mohm. Arsh Khan, Rohit Verma, Ramesh Singh Parihar, Kunja Bihari Sahoo, Varsha Sahu and Shraddha Netam, “Power Quality Improvement: A Fuzzy Logic Approach to DVR-Based Voltage Sag Mitigation”, – published in the proceeding of the 7th International Conference on Energy Systems, Drives and Automations (ESDA2024) organized by Applied Computer Technology, Kolkata during 14–15 December 2024.
  7. Swati Lipsa, Ranjan Kumar Dash, Subhra Debdas, Korhan Cengiz, Pankaj Kumar and Nitai Pal, “An accurate and explainable approach towards cardiac disease detection using bidirectional long short-term memory”, – published in the proceeding of the 7th International Conference on Energy Systems, Drives and Automations (ESDA2024) organized by Applied Computer Technology, Kolkata during 14–15 December 2024.
  8. Kumar Avinash Chandra, Prabhat Kumar Upadhyay, Pankaj Kumar and Nitai Pal, “A Practical MI-Driven BCI Framework for Real-Time Motorized Wheelchair Control using Reduced-Channel EEG and Hybrid Deep Learning”, – published in the proceeding of the 7th International Conference on Energy Systems, Drives and Automations (ESDA2024) organized by Applied Computer Technology, Kolkata during 14–15 December 2024.
  9. Rakesh Roshan, Subhra Debdas, Srikanta Mohapatra, Pankaj Kumar, Nitai Pal and K. Praveen, “Smart Agriculture: Cost Optimization through IoT-enabled Remote Monitoring, Animal Deterrence, and Precision Irrigation”, – published in the proceeding of the 7th International Conference on Energy Systems, Drives and Automations (ESDA2024) organized by Applied Computer Technology, Kolkata during 14–15 December 2024.
  10. Avinash Prasad, Brijesh Singh, Nitai Pal, Pankaj Sarkar, Arnab Ghosh and Sudipta Chakraborty, “Review on EV Fast Charging, Stability and Deployment”, – published in the proceeding of the 7th International Conference on Energy Systems, Drives and Automations (ESDA2024) organized by Applied Computer Technology, Kolkata during 14–15 December 2024.
  11. Subhabrata Boral, Nitai Pal, “Performance Investigation of Boost Converter using Adaptive Neuro Fuzzy Inference System and PI Controller”, – published in the proceeding of the 11th International Conference on Microelectronics Circuits and Systems (Micro2024) Organized by Delhi Technological University, Delhi during 16–17 May 2024.
  12. Arunima Mahapatra, Nitai Pal, Ratan Mandal, “A comprehensive study on the methods of optimization used in hybrid renewable energy systems”, – published in the proceeding of the 11th International Conference on Microelectronics Circuits and Systems (Micro2024) Organized by Delhi Technological University, Delhi during 16–17 May 2024.

2023:

  1. Abhay Chhetri, Devender Kumar Saini, Monika Yadav and Nitai Pal, “Performance Analysis of Machine Learning Algorithms for Estimation of EV Penetration”, – published in the proceeding of the 6th International Conference on Energy Systems, Drives and Automations (ESDA2023) organized by Applied Computer Technology, Kolkata during 30–31 December 2023.
  2. Brijesh Singh, Nitai Pal, Mukesh Prasad, and Preeti Roy, “Investigation for Sustainable Development of Micro Agriculture through Hybrid Energy Systems (Solar and Biomass) in Remote Areas of Jharkhand: A Comprehensive Survey”, – published in the proceeding of the 6th International Conference on Energy Systems, Drives and Automations (ESDA2023) organized by Applied Computer Technology, Kolkata during 30–31 December 2023.
  3. Umang Sharma, Arunima Mahapatra, Pankaj Kumar, Ravi Chaurasia, Nitai Pal, and Himanshu Sharma, “Techno-economic Performance Analysis of an Off-Grid Hybrid Power Generation System for Isolated Remote Area of India”, – published in the proceeding of the 6th International Conference on Energy Systems, Drives and Automations (ESDA2023) organized by Applied Computer Technology, Kolkata during 30–31 December 2023.
  4. Promit Kumar Saha, and Nitai Pal, “Multi-Input Hybrid DCDC Converter Formulation and Analysis in an Integrated Environment”, – published in the proceeding of the 6th International Conference on Energy Systems, Drives and Automations (ESDA2023) organized by Applied Computer Technology, Kolkata during 30–31 December 2023.
  5. Isarar Ahamad, Faizan Arif Khan, Arun Kumar Yadav, Nitai Pal, Vishal S Chandel, Aftab Yaseen, Ijtaba Saleem Khan, Mahfooz Ahmad, and Mohammad Arsh Khan, “Performance Evaluation of Cascaded H-Bridge Multilevel Inverters based on Solar Energy”, – published in the proceeding of the 6th International Conference on Energy Systems, Drives and Automations (ESDA2023) organized by Applied Computer Technology, Kolkata during 30–31 December 2023.
  6. Deepti Singh, Nitai Pal and Brijesh Singh, “Deployment of Reserve Corridors in PV Integrated Power System and Performance Analysis”, – published in the proceeding of the 7th International Conference on Computer Applications in Electrical Engineering-Recent Advances (CERA 2023), to be organized by IIT Roorkee, Haridwar, Uttarakhand during 27–29 October 2023. doi: 10.1109/CERA59325.2023.10455695.
  7. Arunima Mahapatra and Nitai Pal, “Comprehensive Study on Sizing of Hybrid-Renewable-Energy System using Commercial Software”, – published in the proceeding of the International Conference on Engineering Design and Computing (ICEDC 2023), co-sponsored by IEEE Kolkata Section, organized by Swami Vivekannada University, West Bengal, during 28–29 January 2023.
  8. Deepti Singh, Nitai Pal and S. K. Sinha, “Critical Technical Review on Challenges and Research Scope of Large-Scale Solar PV Integration in Power Networks”, – published in the proceeding of the 5th International Conference on Energy Systems, Drives and Automations (ESDA2022) organized by Applied Computer Technology, Kolkata during 31st December 2022–01st January 2023.

2019:

  1. Sayantam Sarkar, Anjan Kumar Dan and Nitai Pal, “Development and Analysis of an Efficient Energy Management for a PV Based Microgrid System”, – published in the proceeding of IEEE International Conference on Smart Cities Model (ICSCM 2019) organized by the IEEE Madras Section and IIT Madras, India held at Indian Institute of Technology, Madras, Chennai during 20–21 January 2019, pp. 1-6, doi: 10.1109/ICSCM46742.2019.9081820.

2018:

  1. Asim Halder, Debasish Mondal and Nitai Pal, “Nonlinear Optimal STATCOM Controller for Power System Based on Hamiltonian Formalism”, – published in the proceeding of IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES 2018) organized by IIT Madras, Chennai during 18–21 December 2018, pp. 1-6.
  2. Prakhar Sharma, Pankaj Kumar and Nitai Pal, “Design and Implementation of Closed Loop Controlled Boost Converter for Solar Power Installation System using Fuzzy Logic Controller”, – published in the proceeding of an IEEE International Conference on Recent Advances in Information Technology (RAIT-2018) organized by Department of Computer Science and Engineering, held at IIT(ISM) Dhanbad, India, held at Dhanbad, during 15–17 March 2018, pp. 1-5.
  3. Nimish Kumar, Nitai Pal, Pankaj Kumar and Aprajita Kumari, “Impact of Different Inertia Weight Functions on Particle Swarm Optimization Algorithm to Resolve Economic Load Dispatch Problems”, – published in the proceeding of an IEEE International Conference on Recent Advances in Information Technology (RAIT-2018) organized by Department of Computer Science and Engineering, held at IIT(ISM) Dhanbad, India, held at Dhanbad, India during 15–17 March 2018, pp. 1-5.
  4. Hariom Kumar, Jagannath Patra, Ashiwani Yadav and Nitai Pal, “Power Quality Assessment and Improvement of 3-Phase 3-Wire Non-Linear System using Instantaneous Power Theory Based DSTATCOM”, – published in the proceeding of an IEEE International Conference on Recent Advances in Information Technology (RAIT-2018) organized by Department of Computer Science and Engineering, held at IIT(ISM) Dhanbad, India, held at Dhanbad, during 15–17 March 2018, pp. 1-6.
  5. Ashiwani Yadav, Jagannath Patra, Nitai Pal and Harshit Gupta, “Performance Analysis of VSI Based Standalone PV Generation System Connected to Induction Motor”, – published in the proceeding of an IEEE International Conference on Recent Advances in Information Technology (RAIT-2018) organized by Department of Computer Science and Engineering, Indian Institute of Technology (Indian School of Mines) Dhanbad, India, held at IIT(ISM) Dhanbad, during 15–17 March 2018, pp. 1-6.

2017:

  1. Nitai Pal, Ashiwani Yadav, Shweta Rani and Jagannath Patra, “Voltage Profile Improvement in Off Grid Wind Turbine System using MGVC and Diesel Generator”, – published in the proceeding of 4th International Conference on Power, Control and Embedded Systems (ICPCES–2017), organized by the Department of Electrical Engineering, MNNIT Allahabad, held at MNNIT Allahabad, during 09–11 March 2017, pp. 64-65.

2016:

  1. Mohit Kumar, Pankaj Kumar, Ashiwani Yadav and Nitai Pal, “Fuzzy Gain Scheduled Intelligent Frequency Control in an AC Microgrid”, – published in the proceeding of 3rd International Conference on Recent Advances in Information Technology (RAIT-2016), organized by the Department of Computer Science and Engineering held at IIT(ISM) Dhanbad, during 03–05 March 2016, pp. 237-242.

2015:

  1. Nitai Pal, Kota Sunil Patro and Budankailu Varsha Subudhi “Study on Non-isolated Power Electronics Converters using State Space Analysis”, – published in the proceeding of 2nd International Conference & Exhibition on “Industrial Engineering-2015” Dubai, UAE, during 16–18 November 2015, Volume 4, Issue 5, pp. 36.
  2. Mr. Palash Pal, Prof. Pradip Kumar Sadhu, Dr. Nitai Pal, “Filter Design for Harmonics Minimization of CSI Based Contact Less Induction Heater”, – published in the proceeding of IEEE Conference, International Conference on Energy, Power and Environment (ICEPE-2015), organized by Department of Electrical & Electronics Engineering, NIT Meghalaya, during 12–13 June 2015.

2014:

  1. Nibedita Das and Nitai Pal, “Thermal Impact on LED based Solar PV Cell”, – published in the proceeding of 2nd IEEE International Conference on Emerging Technological Trends in Electronics, Communication and Networking 2014 (ET2ECN2014), organized by SVNIT, Surat, India, during 26–27 December 2014, pp.46-49.
  2. Nitai Pal, S. Vamsi Krishna and Pradip Kumar Sadhu, “Stand Alone Effective Lighting System using Defective Fluorescent Tube Light for Haul Road”, – published in the proceeding of “International Conference on Control, Instrumentation, Energy and Communication” (CIEC14), organized by Department of Applied Physics, University of Calcutta, held at Kolkata, during 31st January–02nd February 2014, pp. 406-410.
  3. Pradip Kumar Sadhu, Ananyo Bhattacharya and Nitai Pal, “Review of Microwave Oven-a Health Hazardous Tool for Cooking as Compared to Induction Cooker”, – published in the proceeding of “International Conference on Control, Instrumentation, Energy and Communication” (CIEC14), organized by Department of Applied Physics, University of Calcutta, held at Kolkata, during 31st January–02nd February 2014, pp. 187-191.
  4. Nibedita Das, Nitai Pal and Pradip Kumar Sadhu, “Selection of LED T8 Over CFL T8 for an Efficient Interior Lighting Design”, – published in the proceeding of “International Conference on Control, Instrumentation, Energy and Communication” (CIEC14), organized by Department of Applied Physics, University of Calcutta, held at Kolkata, during 31st January–02nd February 2014, pp. 182-186.
  5. Suhit Datta, Nihit Kumar Singh, Swastik Roy and Nitai Pal, “Some Studies on Utilization of Human Body Energy with Hybrid Piezoelectric and Thermoelectric Effect”, – published in the proceeding of “International Conference on Control, Instrumentation, Energy and Communication” (CIEC14), organized by Department of Applied Physics, University of Calcutta, held at Kolkata, during 31st January–02nd February 2014, pp. 241-243.

2013:

  1. Pradip Kumar Sadhu, Ananyo Bhattacharya and Nitai Pal “Dual Zone Industrial Induction Heater using MOSFET based High Frequency Hybrid Resonant Converter”, – published in the proceeding of 2013 IEEE 1st International Conference on Condition Assessment Techniques in Electrical Systems (CATCON 2013), organized by IEEE, DEIS Kolkata Chapter, held at Jadavpur University, Kolkata, during 06–08 December 2013, pp. 335-340.
  2. Nitai Pal, Rabindra Nath Raul, S. Vamsi Krishna and Pradip Kumar Sadhu, “Modulation Techniques for Power Line Communications”, – published in the proceeding of “The 2nd International Conference on Engineering & Applied Science” (ICEAS 2013), at Tokyo, Japan, during 15–17 March 2013, pp. 1331-1337.

2012:

  1. Nitai Pal, Pradip Kumar Sadhu and S. Vamsi Krishna, “A Constant Brightness LED Based Cap Lamps for Underground Coalmines using Buck Regulator”, – published in the proceeding of “World Congress of Engineering 2012” (WCE 2012), at the Imperial College, London, U.K., during 04–06 July 2012, ISBN: 978-988-19252-1-3, ISSN: 2078-0958, Volume II, pp. 986-990.
  2. Pradip Kumar Sadhu, Nitai Pal and Atanu Bandyopadhyay, “A new generation IGBT based High Frequency Mirror Inverter for Induction Heating”, – published in the proceeding of “World Congress of Engineering 2012” (WCE 2012), at the Imperial College, London, U.K., during 04–06 July 2012, ISBN: 978-988-19252-1-3, ISSN: 2078-0958, Volume II, pp. 962-967.
  3. Nitai Pal, Pradip Kumar Sadhu and R. Swaroop, “Closed Loop Speed Control of DC Motors used in Rock Drilling and Mud Pump Application”, – published in the proceeding of “International MultiConference of Engineers and Computer Scientist” (IMECS 2012), at The Royal Garden, 69 Mody Road, Tsimshatsui, Kowloon, Hong Kong during 14–16 March 2012, ISBN: 978-988-19251-1-4, pp. 1052-1054.
  4. Pradip Kumar Sadhu, Nitai Pal and Atanu Bandyopadhyay, “Choice of Semiconductor Switches for Energy Efficient Induction Heated Pipe-line using H. F. Mirror Inverter”, – published in the proceeding of “International MultiConference of Engineers and Computer Scientist” (IMECS 2012), at The Royal Garden, 69 Mody Road, Tsimshatsui, Kowloon, Hong Kong during 14–16 March 2012, ISBN: 978-988-19251-1-4, pp. 1002-1005.
  5. Nitai Pal, S. Vamsi Krishna, Ramjee Prasad Gupta, Ayodhya Kumar and Upendra Prasad, “Haul Roads Lighting System for Open Cast Mine using Green Energy”, – published in the proceeding of “International MultiConference of Engineers and Computer Scientist” (IMECS 2012), at the Royal Garden, 69 Mody Road, Tsimshatsui, Kowloon, Hong Kong during 14–16 March 2012, ISBN: 978-988-19251-1-4, pp. 987-990.

2010:

  1. D. Sinha, A. Bandyopadhyay, P. K. Sadhu and N. Pal, “Computation of Inductance and AC Resistance of a Twisted Litz-Wire for High Frequency Induction Cooker”, – published in the proceeding of IEEE sponsored International Conference on “Industrial Electronics, Control & Robotics” (IECR 2010) during 27–29 December 2010 at NIT, Rourkela, Orissa, India.
  2. Dola Sinha, Atanu Bandyopadhyay, Pradip Kumar Sadhu and Nitai Pal, “Optimum Construction of Heating Coil for Domestic Induction Cooker”, – published in the proceeding of International Conference on Modelling, Optimization and Computing (ICMOC 2010) organized by NIT, Durgapur during 28–30 October 2010, pp. 439–444.
  3. Nitai Pal, Pradip Kumar Sadhu, Ayodhya Kumar and Upendra Prasad, “Energy Efficient Solar CFL Lighting System using MOSFET Based High Frequency Inverter for Remote Areas”, – published in the proceeding of the 2nd International Conference on Computer and Automation Engineering (ICCAE 2010) organized by IACSIT, Sichuan University and IEEE, Computational Intelligence Society, held in Suntec City, Singapore during 26–28 February 2010, Volume 5, pp. 646-649.
  4. Nitai Pal, Pradip Kumar Sadhu, Ramjee Prasad Gupta and Upendra Prasad, “Review of LED Based Cap Lamps for Underground Coalmines to Improve Energy Efficiency as Compared to Other Light Sources”, – published in the proceeding of The 2nd International Conference on Computer and Automation Engineering (ICCAE 2010) organized by IACSIT, Sichuan University and IEEE, Computational Intelligence Society, held in Suntec City, Singapore during 26–28 February 2010, Volume 5, pp. 675-677.
  5. Pradip Kumar Sadhu, Nitai Pal, Atanu Bandyopadhyay and Dola Sinha ‘Review of Induction Cooking – a Health Hazards Free Tool to Improve Energy Efficiency as Compared to Microwave Oven.’ published in the proceeding of the 2nd International Conference on Computer and Automation Engineering (ICCAE 2010) organized by IACSIT, Sichuan University and IEEE, Computational Intelligence Society, held in Suntec City, Singapore during 26–28 February 2010, Volume 5, pp. 650-654.
  6. Pradip Kumar Sadhu, Netai Paul, Dola Sinha and Atanu Bandyopadhyay ‘Energy Efficient Induction Heated Cooking – Range using MCT based Hybrid Resonant Converter.’ published in the proceeding of the 2nd International Conference on Computer and Automation Engineering (ICCAE 2010) organized by IACSIT, Sichuan University and IEEE, Computational Intelligence Society, held in Suntec City, Singapore during 26–28 February 2010, Volume 5, pp. 637-641.

2009:

  1. P. K. Sadhu, N. Pal, T. K. Chatterjee, R. P. Gupta and U. Prasad, “Energy Conservation and Economic Lighting System using Solid-state Cap Lamps in Underground Coal Mines” – published in the proceedings of the International Conference on Ninth International Mine Ventilation Congress, 09th IMVC, New Delhi, India held on 10–13 November 2009, organized by Department of Mining Engineering, Indian School of Mines, Dhanbad, India, pp. 217 – 221.
  2. Nitai Pal, Pradip Kumar Sadhu, Dilip Kumar Mittra and Upendra Prasad, “Electrical Energy Conservation and Losses Management of Rotating Electrical Machines used in Underground Coal Mines” – published in the proceedings of the International Conference on Ninth International Mine Ventilation Congress, 09th IMVC, New Delhi, India held on 10–13 November 2009, organized by Department of Mining Engineering, Indian School of Mines, Dhanbad, India. pp. 223 – 228.

2007:

  1. Nitai Pal, Pradip Kumar Sadhu, Dilip Kumar Mittra and Rupendranath Chakrabarti, “Role of Electromagnetic and Radio Frequency Noise Suppressor for High Frequency Inverter Operated Induction Heating Equipment”, – published in the proceeding of an International Conference on Modeling and Simulation MS-07 organized by the Department of Applied Physics, University of Calcutta in association with AMSE held at the Circle, VIP Road, Kolkata-52 during 03–05 December 2007, pp. 440 – 443.
  2. Pradip Kumar Sadhu, Nitai Pal, Rupendranath Chakrabarti and T. K. Chatterjee, “Performance Analysis of H.F. Mirror Inverter for Energy Efficient Induction Cooking Appliance Range”, – published in the proceeding of an International Conference on Modeling and Simulation (MS 07) organized by the Department of Applied Physics, University of Calcutta in association with AMSE held at the Circle, VIP Road, Kolkata-52 during 03–05 December 2007, pp. 444–448.
  3. Nitai Pal, Dr. Pradip Kumar Sadhu, Prof. (Dr.) Rupendranath Chakrabarti and Prof. (Dr.) Dilip Kumar Mittra, “Mathematical Modeling of Induction Cooker with PSPICE Simulation”, – published in the proceeding of an International Conference on Emerging Trends in Electrical Engineering (ETEE 2007) organized by Jadavpur University, Kolkata held at Science City, Kolkata during 12–14 January 2007, pp. 162–167.
  4. Nitai Pal, Dr. Pradip Kumar Sadhu, Narendranath Jana, Prof. (Dr.) Rupendranath Chakrabarti and Dr. T. K. Chatterjee, “A Real Time Model Calculations for Skin Effect of Induction Cooktop (Cooker)”, – published in the proceeding of an International Conference on Emerging Trends in Electrical Engineering (ETEE 2007) organized by Jadavpur University, Kolkata held at Science City, Kolkata during 12–14 January 2007, pp. 250–256.

2005:

  1. Nitai Pal, Dr. P.K. Sadhu, Prof. (Dr.) R. N. Chakrabarti and Prof. (Dr.) D. K. Mittra, “A Novel Energy Efficient Heat Transfer System for Induction Heated Cooking-range using Radio-frequency Series Resonant Inverter”, – published in the proceeding of 3rd International Conference on Energy Research & Development (ICERD-3) organized by College of Science & Engineering, Kuwait University and Ministry of Energy, Kuwait held at Hotel Sheraton, Kuwait during 21–23 December 2005, pp. 797–806.
  2. Nitai Pal, Narendranath Jana, Pradip Sadhu and Rupendra Chakrabarti, “Analysis of DC-Link Half-bridge Resonant Inverter used for Domestic Induction Cookers”, – published in the proceeding of an International Conference (PEITSICON 2005) organized by the Institution of Engineers (U.K.), Calcutta Branch held at the Science City, Kolkata during 28–29 January 2005, pp. 258–261.

2001:

  1. Nitai Pal, Prof A. K. Mukhopadhyay, Dr. Samarjit Sengupta and Utpal Maji, “Optimum Operating Condition of a Series Capacitor Compensated EHV Transmission Line for its Enhanced Efficiency”, – published in the proceeding of an International Conference CIIC-2001 organized by the Department of Applied Physics, University of Calcutta held at the Science City, Kolkata during 13–15 December 2001, pp. 243-248.

National Conference: 25 Nos.

2020:

  1. Faizan A. Khan, Nitai Pal and Syed H. Saeed, “SPV/Wind Hybrid Energy System: Future of Rural India”, – published in the proceeding of 21st National Power System Conference (NPSC 2020) organized by IIT Gandhinagar, Gujarat, India held at Indian Institute of Technology, Gandhinagar, Gujarat during 17–19 December 2020.

2018:

  1. Pankaj Kumar, Prakhar Sharma, Nitai Pal, “Performance Analysis of Underground Mine Ventilation System using MATLAB/Simulink”, – published in the proceeding of 3rd National Conference on Mining Equipment: New Technologies, Challenges and Applications (MENTCA–2018), organized by the Department of Mining Machinery Engineering, IIT(ISM) Dhanbad, held at Dhanbad, during 09–10 February 2018, pp. 110–112.

2017:

  1. Himanshu Sharma, Pankaj Kumar, Yaduvir Singh and Nitai Pal, “PV Cell Characteristic Variations due to Change in Parameters”, – published in the proceeding of National Conference on Renewable Energy Sources for Sustainable Climate (Solaris-2017), organized jointly by IIT (BHU) Varanasi, IIT Delhi and BERS Delhi, held at Varanasi, during 7th – 9th February 2017, pp. 134-141.

2015:

  1. Nitai Pal, Himanshu Sharma, Shivam Yadav and Pankaj Kumar, “A Modeling and Simulation of Photovoltaic Power Generation System for Surface Mine”, – published in the proceeding of National Conference on Mining Equipment: New Technologies, Challenges and Applications (MENTCA–2015), organized by the Department of Mining Machinery Engineering, Indian School of Mines, Dhanbad held at Dhanbad, during 9–10 October 2015, pp. 358-362.

2013:

  1. S. Vamsi Krishna, K. Dharma Rao, Ritesh Mishra, Birendar Singh, P. K. Sadhu and N. Pal, “Efficient Photovoltaic Conversion and its Antecedents”, – published in the proceeding of National Seminar on Energy and Environment for Sustainability (EES–2013), organized by BIT Sindri, Jharkhand held at Sindri, during 16–17 March 2013, pp. 269–273.

2012:

  1. Nitai Pal, S. Vamsi Krishna, R. Nath Raul and P. K. Sadhu, “Study on Coupling Techniques for Power Line Communications”, – published in the E-Proceedings of Michael Faraday IET India Summit-2012, organized by Young Professional Section, the Institution of Engineering and Technology-UK, Kolkata, during November 25, 2012, pp. 163–167.
  2. Nitai Pal, Pradip Kumar Sadhu and S. Vamsi Krishna, “Energy Efficient Stand-alone Lighting System for Surface Mine Haul Roads”, – published in the proceeding of National Seminar on Mining Equipment – New Technologies Challenges and their Application (MENTCA–2012) organized by Department of Mechanical Engineering & Mining Machinery Engineering, Indian School of Mines, Dhanbad, Jharkhand during 19–21 January 2012, pp. 269–276.
  3. Pradip Kumar Sadhu and Nitai Pal, “On-line Cure Monitoring System for OTR Tyres using Intelligent and Proactive Control”, – published in the proceeding of National Seminar on Mining Equipment – New Technologies Challenges and their Application (MENTCA–2012) organized by Department of Mechanical Engineering & Mining Machinery Engineering, Indian School of Mines, Dhanbad, Jharkhand during 19–21 January 2012, pp. 233–239.
  4. Rabindra Nath Raul, Nitai Pal, Pradip Kumar Sadhu and Gautam Sarkar, “LED Based Solid-State Cap Lamps for Underground Mines”, – published in the proceeding of National Seminar on Mining Equipment – New Technologies Challenges and their Application (MENTCA–2012) organized by Department of Mechanical Engineering & Mining Machinery Engineering, Indian School of Mines, Dhanbad, Jharkhand during 19–21 January 2012, pp. 285-291.

2011:

  1. Nitai Pal, Pradip Kumar Sadhu, Atanu Bandyopadhyay and S. Vamsi Krishna, “A Review on Electromagnetic Fields Pollution in Cell-Phone Communication”, – published in the proceeding of National Seminar on Frontiers in Electronics, Communication, Instrumentation and Information Technology (FECIT–2011) organized by Indian School of Mines, Dhanbad during 03–04 November 2011, pp. 51.
  2. S. Vamsi Krishna, Nitai Pal and Pradip Kumar Sadhu, “A Review on Power Line Communications”, – published in the proceeding of National Seminar on Frontiers in Electronics, Communication, Instrumentation and Information Technology FECIT–2011 organized by Indian School of Mines, Dhanbad, Jharkhand during 03–04 November 2011, pp. 53.
  3. Pradip Kumar Sadhu, Nitai Pal, Atanu Bandyopadhyay and Dola Sinha, “A Review on Hazards in Microwaved Cooking and Induction Cooking” published in the proceeding of National Seminar on Frontiers in Electronics, Communication, Instrumentation and Information Technology (FECIT–2011) organized by Indian School of Mines, Dhanbad, Jharkhand during 03–04 November 2011, pp. 67.

2010:

  1. N. Pal, P. K. Sadhu, Rupam Das, Dola Sinha, “Review on Closed Loop Speed Control of DC Motors used in Rock Drilling and Mud Pump Application”, – published in the proceedings of the National Conference cum Workshop on Geological and Technological Facets of CBM, Shale Gas, Energy Resources and CO2 Sequestrain (CSECS2010) organized by Indian School of Mines, Dhanbad during 19–20 November 2010.
  2. Dola Sinha, Pradip Kumar Sadhu and Nitai Pal, “Study of TRIAC Control Strategies for Speed Control of Drill Motor for Different Types of Rocks” – published in the proceedings of the National Conference cum Workshop on Geological and Technological Facets of CBM, Shale Gas, Energy Resources and CO2 Sequestrain (CSECS2010) organized by Indian School of Mines, Dhanbad during 19–20 November 2010, pp. 228-234.
  3. N. Pal, P. K. Sadhu, Kumar Saurabh, Rahul, U. Prasad and R. P. Gupta, “Review on Speed Control of DC Motors used in Mud Pumps of Drill Rig Equipment” – published in the proceedings of the National Seminar on “Drills & Drilling – An Update (D & DU – 2010)” held on 23-24th September 2010, organized by Indian School of Mines, Dhanbad, pp. 163-167.
  4. P. K. Sadhu, N. Pal, Mayank Gupta, Shubham Agarwal and Dola Sinha “Some Studies on Various Aspects of Drilling Technology using DC Motors” – published in the proceedings of the National Seminar on “Drills & Drilling – An Update (D & DU – 2010)” held on 23-24th September 2010, organized by Indian School of Mines, Dhanbad, pp. 73-81.
  5. D. Sinha, S. Das, M. K. Mukherjee, A. Bandyopadhyay, P. K. Sadhu and N. Pal, “Speed Control of Drill Motor for Different Types of Rock Mass According to their Drillability” – published in the proceedings of the National Seminar on “Drills & Drilling – An Update (D & DU – 2010)” held on 23-24th September 2010, organized by Indian School of Mines, Dhanbad, pp. 103-108.

2008:

  1. P. K. Sadhu, N. Pal, D, Sinha and T. K. Chatterjee, “A Comparative Study between Microwave Cooking and Induction Heated Cooking”, – published in the proceeding of National Seminar on Frontiers in Electronics, Communication, Instrumentation and Information Technology (FECIT–2008) organized by Indian School of Mines University, Dhanbad, Jharkhand during 13–15 October 2008, pp. 318–323.
  2. Rakesh Kumar Agrawal, Tamal Batabyal, Dola Sinha, Nitai Pal and Upendar Prasad, “A Comparative Study on Energy Efficient Power-frequency and High-frequency Electrical Heating”, – published in the proceeding of National Seminar on Frontiers in Electronics, Communication, Instrumentation and Information Technology (FECIT–2008) organized by Indian School of Mines University, Dhanbad, Jharkhand during 13–15 October 2008, pp. 389–393.
  3. P. K. Sadhu, N. Pal, D. K. Mittra and Dola Sinha, “Energy Conservation and Losses Management in Rotating Electrical Machines”, – published in the proceeding of National Seminar on Crushing Screening & Conveying (CS&C–2008) organized by Indian School of Mines University, Dhanbad, Jharkhand during 11–12 September 2008, pp. 157–165.
  4. N. Pal, P. K. Sadhu, T. K. Chatterjee and U. Prasad, “Role of Electrical Energy Conservation and Management in Industries”, – published in the proceeding of a National Seminar on Crushing Screening & Conveying (CS&C–2008) organized by Indian School of Mines University, Dhanbad, Jharkhand during 11–12 September 2008, pp. 29–34.

2006:

  1. Nitai Pal, Dr. Pradip Kumar Sadhu, Prof. (Dr.) Rupendranath Chakrabarti and Dr. Tarun Kumar Chatterjee, “Circuit and Wave Analysis of a New Generation Radio Frequency Mirror Inverter Applied to Induction Heating”, – published in the proceeding of a National Seminar on Condition Monitoring Overview & Advanced Techniques (COMOAT–2006) organized by Indian School of Mines, Dhanbad during 15–16 September 2006, pp. 367–378.

2002:

  1. Nitai Pal, Pradip Kumar Sadhu, Rupendranath Chakrabarti and Narendranath Jana, “A Novel Radio-frequency Series Load Resonant Inverter for Induction Cooking”, – published in the proceeding of 12th National Power Systems Conference (NPSC–2002) organized by IIT Kharagpur, Vol II, 27–29 December 2002, pp. 595 – 598.
  2. Nitai Pal, Dr. Pradip Kumar Sadhu, Prof. (Dr.) R. N. Chakrabarti and Narendranath Jana, “High Efficient Industrial Induction Heating using Phase Shifted PWM Inverter”, –published in the proceeding of 28th Annual Convention and Exhibition of IEEE India Council EPIC, IEEE (ACE–2002) organized by IEEE Calcutta Section held at the Science City, Kolkata during 20–21 December, 2002, pp. 418–421.
  3. N. Pal, Dr P. K. Sadhu, Dr. R. N. Chakrabarti, Mrs. N. L. Nath and N. Jana, “High Efficient Industrial Induction Heating using Radio Frequency Mirror Inverter”, – published in the proceeding of National Seminar on Indian Power Scenario- present and future perspective, 18th National Convention of Electrical Engineers (POWER–2002) organized by the Institution of Engineers (India) Jharkhand State Centre, Ranchi held at Birla Institute of Technology, Mesra, Ranchi during 01–02 November, 2002, pp. 117–120.

Patents

Patent Granted: 12 Nos. (Indian)

2024:

  1. Patent No: 522237, dated 08th March 2024 granted for “Solar Induction Heating System using High Frequency Hybrid Resonant Inverter under ZSI Mode”, Patentee: Indian Institute of Technology (ISM), Dhanbad, Inventors:  Avijit Chakraborty, Aniruddha Bhattacharjee, Pipul Roy, Pradip Kumar Sadhu, Niladri Das and Nitai Pal.

2023:

  1. Patent No: 470425, dated 20th November 2023 granted for “Solar based Hybrid Heating System and Method with Constant Load Conditions for Low-Wattage Metallic Appliances”, Patentee: Indian Institute of Technology (ISM), Dhanbad, Inventors:  Moumita Sadhu, Niladri Das, Meetarani Tripathy, Pradip Kumar Sadhu, Nitai Pal and Utpal Goswami.
  2. Patent No: 451268, dated 13th September 2023 granted for “Solar based Hybrid Heating System and Method with Automatic Load Impedance Matching for Low-Wattage Metallic Appliances”, Patentee: Indian Institute of Technology (ISM), Dhanbad, Inventors: Kundan Kumar, Anik Goswami, Pradip Kumar Sadhu, Debabrata Roy, Nitai Pal, M. K. Singh.
  3. Patent No: 429901, dated 25th April 2023 granted for “An Induction Curing System and Method for Roof Treatment with Asphalt Concrete to Cure a Crack-on Roof”, Patentee: Indian Institute of Technology (ISM), Dhanbad, Inventors: Pradip Kumar Sadhu, Kaushik Neogi, Atanu Banerjee, G. Panda, N. Pal, K. C. Jana.

2022:

  1. Patent No: 413988, dated 08th December 2022 granted for “A High Frequency Hybrid Resonant Inverter with AC Input Source”, Patentee: Indian Institute of Technology (ISM), Dhanbad, Inventors: Pradip Kumar Sadhu, Ananyo Bhattacharya, Vivekananda Mukherjee and Nitai Pal.
  2. Patent No: 409320, dated 19th October 2022 granted for “Contactless Emergency Lighting and Communication System with Axial Portability for Underground Mines”, Patentee: Indian Institute of Technology (ISM), Dhanbad, Inventors: S. Vamsi Krishna, Nitai Pal and Pradip Kumar Sadhu.
  3. Patent No: 405442, dated 31st August 2022 granted for “A Pacemaker Battery Recharger for Enhancing the Service Life”, Patentee: Indian Institute of Technology (ISM), Dhanbad, Inventors: Pradip Kumar Sadhu, Animesh Halder, Nitai Pal, Ankur Ganguly, Prabir Bhowmik and Moumita Sadhu.
  4. Patent No: 403045, dated 4th August 2022 granted for “A System for Induction Heated Sterilization of Surgical Instruments and a Method for the Same”, Patentee: Indian Institute of Technology (ISM), Dhanbad, Inventors: Pradip Kumar Sadhu, Nitai Pal, Agamani Chakraborty and Atanu Bandyopadhyay.
  5. Patent No: 400850, dated 5th July 2022 granted for “A Hybrid Particulate Matter (PM) Emission Control Device having Electrostatic Precipitator and High Frequency Induction Heating Coil for Diesel Engine and Method for the Same”, Patentee: Indian Institute of Technology (ISM), Dhanbad, Inventors: Kaushik Sit, Pradip Kumar Sadhu, Arijit Baral, Kallol Bhaumik, Moumita Chakraborty, Sudipta Chakraborty and Nitai Pal.
  6. Patent No: 393014, dated 25th March 2022 granted for “A High Frequency Full Bridge Series Resonant Inverter with AC Input Source”, Patentee: Indian Institute of Technology (ISM), Dhanbad, Inventors: Pradip K. Sadhu, Debabrata Roy, Nitai Pal and Arijit Baral.

2021:

  1. Patent No: 359838, dated 26th February 2021 granted for “Emission Control Device for Diesel Engine to Reduce the Particulate Matters in Exhaust Gases and the Method for the Same”, Patentee: Indian Institute of Technology (ISM), Dhanbad, Inventors: Pradip K. Sadhu, Nitai Pal and Atanu Bandyopadhyay.

2020:

  1. Patent No: 341969, dated 20th July 2020 granted for “A High Frequency Modified Half Bridge Resonant Inverter with AC Input Source”, Patentee: Indian Institute of Technology (ISM), Dhanbad, Inventors: Pradip Kumar Sadhu, Palash Pal, Nitai Pal, Arijit Baral.

Patent Applied: 04 Nos. (Indian)

  1. Ashiwani Yadav, Ramesh Singh Parihar, Poorva Sharma, Dewashri Pansari, Nitai Pal, Faizan Arif Khan and Rohit Kumar Verma, “A Process for a Hybrid Renewable Energy System”, Journal of Patent, Patent Office, Government of India, Journal No. 16/2024, publication date 19/04/2024, Application No. 202221059628.
  2. Pradip Kumar Sadhu, Anik Goswami, Sonal Mishra, Nitai Pal, Arijit Baral, Anirban Ghoshal and Kartick Chandra Jana, “A Hybrid Renewable Energy Driven Bidirectional Wireless Charging System for Dynamic and Static Electric Vehicle” Journal of Patent, Patent Office, Government of India, Journal No. 07/2024, publication date 16/02/2024, Application No. 202231032196.
  3. Dr. Debarati Dey Roy, Prof. Dr. Arijit Saha, Susmita Dhar Mukherjee, Promit Kumar Saha, Dr. Rituparna Mukherjee, Dr. Saikat Majumdar, Anirban Ghosal and Dr. Nitai Pal, “Electrically Doped DNA and Iron Quantum Dot Spintronic Model” Journal of Patent, Patent Office, Government of India, Journal No. 10/2023, publication date 10/03/2023, Application No. 202331004023.
  4. Abhishek Dhar, Promit Kumar Saha, Saurabh Adhikari, Rituparna Mukherjee, Saikat Majumdar, Aritras Chakraborty and Nitai Pal, “Implementing a Smartphone-Controlled Low-Cost Drone” Journal of Patent, Patent Office, Government of India, Journal No. 06/2023, publication date 10/02/2023, Application No. 202331007043.

Projects & Activities

Sponsored Research Projects (External Funded)

R&D Projects Completed: Three (03) Nos.

1. a) Project Title:

Simulation of high-frequency mirror inverter for energy efficient induction heated cooking oven using PSPICE.

b) Objective:

Simulation of mirror inverter circuit for energy efficient induction heated cooking oven.

c) Status:

Completed (w.e.f. 01 / 04 / 2008 to 31 / 03 / 2011).

d) Project Value:

Rs. 6,98,000/-

e) Sponsoring Agency:

University Grant Commission (UGC), New Delhi, India.

f) Working Experience:

Co-investigator of the Research Project.

2. a) Project Title:

Development of Hybrid Off-grid Power Supply System for Remote Areas.

b) Objective:

Development of the state-of-the-art setup of hybrid off-grid power supply system for demonstrating and functioning the energy management and load balancing in remote areas.

c) Status:

Completed (w.e.f. 01 / 04 / 2013 to 31 / 03 / 2016).

d) Project Value:

Rs. 6,61,000/-

e) Sponsoring Agency:

University Grant Commission (UGC), New Delhi, India.

f) Working Experience:

Principal Investigator (PI) of the Research Project.

3. a) Project Title:

Design and Development of PV-Wind, Energy Storage-based Hybrid Renewable Energy System with Proper Energy Management and Control (as Co-PI)

b) Sponsoring authority:

NPIU, Govt. of India (under “TEQIP Collaborative Research Scheme”)

c) Amount Sanctioned:

Rs.12.45* Lakh

d) Date of sanction:

18/06/2019

e) Current Status:

Completed on 31st March 2021 (at Govt Engineering College, Raipur)

f) Working Experience:

Co-investigator of the Research Project.

* The entire sanctioned amount has been utilized by the PI of the Project, Dr. Ashiwani Yadav (Research Scholar of EE-Dept, IIT(ISM) Dhanbad under the supervision of Prof. Nitai Pal) at Govt. Engineering College, Raipur.

R&D Projects Ongoing: Two (02) Nos.

1. a) Project Title:

Deployment of Smart Portable Off-Grid Hybrid Combined Heat & Power Unit Based on Hybrid Energy (Solar and Biomass) for Micro Farming and Small Food Processing Industries Located in Rural Areas of Jharkhand.

b) Objective:

Development of the state-of-the-art setup of a hybrid energy system for micro farming and small food processing industries located in rural areas of Jharkhand.

c) Sponsoring authority:

JREDA, Ranchi

d) Amount Sanctioned:

Rs. 48.554 Lakh

e) Status:

Ongoing (w.e.f. 22.09.2023)

f) Working Experience:

Principal Investigator (PI) of the Research Project.

2. a) Project Title:

Dynamic Charging of EVs using Wireless Power Transfer (WPT) Technique

b) Objective:

Development of the state-of-the-art setup of wireless charging infrastructure for EVs in dynamic condition.

c) Sponsoring authority:

IIT (ISM) Dhanbad (Institute Fund)

d) Amount Sanctioned:

Rs.10.00 Lakh

e) Status:

Ongoing (w.e.f. 10.08.2021)

f) Working Experience:

Co-investigator of the Research Project.

Consultancy Project (for ONGC)

EDP / Short Course Organized:
  • Consultant In-charge (CI) of the EDP course entitled “Preventive Maintenance and Electrical Safety in Mines (No: CONS 7304 E)”, dated 20–24 January 2025, Clients: CIL & it’s Subsidiaries, Value: Rs. 31,50,000/-
  • Consultant In-charge (CI) of the EDP course entitled “Electrical Safety in Sustainable Mines: Challenges and Mitigation (No: EDP/7212/2023-24)”, dated 22–26 July 2024, Clients: CIL & it’s Subsidiaries, Value: Rs. 19,20,000/-.
  • Consultant In-charge (CI) in Consultancy Project titled “Recent Challenges and Mitigation Thereof on Electrical Safety in Mines (No: EDP/0002/18-19)”, dated 22–26 June 2018; (Value: Rs. 6,80,000/-).
  • Consultant In-charge (CI) in Consultancy Project titled “Electrical Safety and Protection in Mines (No: CONS/3671/17-18)”, dated 17–21 December 2017; (Value: Rs. 8,22,478/-).
  • Consultant In-charge (CI) in Consultancy Project titled “Electrical Safety in Mines & Future Prospects (No: CONS/3546/17-18)”, dated 19–22 June 2017; (Value: Rs. 9,79,611/-).
  • Co-consultant In-charge (Co-CI) in Consultancy Project titled “Electrical Safety in Mines (No: CONS/3389/2016-17)”, dated 26–30 December 2016; (Value: Rs.3,99,983/-).
  • Co-consultant In-charge (Co-CI) in Consultancy Project titled “Advanced Electrical Power Technology (No: CONS/2839/2015-16)”, dated 12–17 July 2015; (Value: Rs.2,26,000/-).
  • Consultant In-charge (CI) in Consultancy Project titled “Advanced Power Electronics and Power Quality (No: CONS/2840/2015-16)”, dated 05–10 July 2015; (Value: Rs.2,18,000/-).
  • Consultant In-charge (CI) in Consultancy Project titled “Application of Power Electronics (No: CONS/2715/14-15)”, dated 29th December 2014 to 03rd January 2015; (Value: Rs. 1,64,000/-).
  • Consultant In-charge (CI) in Consultancy Project titled “Application of Power Electronics in Renewable Energy (No: CONS/2518/13-14)”, dated 07–11 July 2014; (Value: Rs.1,48,500/-).
  • Consultant In-charge (CI) in Consultancy Project titled “Application of Power Electronics in Renewable Energy (No: CONS/2512/13-14)”, dated 30th June to 04th July 2014; (Value: Rs.1,22,000/-).
  • Co-consultant In-charge (Co-CI) in Consultancy Project titled “Advanced Power Electronics and Drives (No: CONS/2403/13-14)”, dated 30th December 2013 to 04th January 2014; (Value: Rs.1,79,000/-).

Membership of Scientific Societies

Membership of Professional Bodies:

  1. Senior Member No. 92825051, IEEE, USA.
  2. Member IEEE Power & Energy Society (PES), Member IEEE Power Electronics Society (PELS), USA.
  3. Fellowship No. F-1200719 IE(I), Fellow of the Institution of Engineers (India), Kolkata, India.
  4. Fellowship No. F-504039 (IETE), Fellow of the Institution of Electronics & Telecommunication Engineers, New Delhi, India.
  5. Membership No. SM 9875 (98), IIIE (Indian Institution of Industrial Engineering), Navi Mumbai, India.
  6. Membership No. 118510, IAENG (International Association of Engineers), Hong Kong.
  7. Membership No. 80337149, IACSIT (International Association of Computer Science and Information Technology), Singapore.
  8. Membership No. LM–74602, ISTE (Indian Society for Technical Education), New Delhi, India.
  9. Membership No. LM–31239, SSI (System Society of India), New Delhi, India.
  10. Membership No. IDES–5075, Association of Computer Electronics and Electrical Engineers, Institute of Doctors, Engineers and Scientists (IDES).
  11. Membership No. 20150713544, Institute of Advanced Engineering and Science (IAES).
  12. Chartered Engineer [India] from Institution of Engineers (India), Kolkata, India.

Other Academic and Administrative Activities

Administrative / Other Responsibilities:

  1. Senate Member w.e.f. August 2023 till date.
  2. Senate Nominee-1 of SPGC w.e.f.  September 2023 till date.
  3. Chairman of Departmental Grievance Redressal Committee (DGRC) for the Students of the Department of Electrical Engineering w.e.f. February 2024 till date.
  4. Warden of Jasper Hostel w.e.f. July 2023 till date.
  5. DFSC Member (for Professor & Assoc. Prof.) w.e.f. May 2024 till date.
  6. DPAC Member of the Department w.e.f. May 2022 till date.
  7. Stock Holding Officer (Chairman) of the Department w.e.f. May 2018 till date.
  8. Principal Coordinator of Research and Development Centre for New and Renewable Energy in Jharkhand w.e.f. December 2023 till date.
  9. Institute Representative of JEE (Adv.) Exam.
  10. Member of the committee for Improving students' employability in Government Polytechnics in Jharkhand w.e.f. January 2024 till date.
  11. Convener of DPGC of the Department w.e.f. October 2020 to October 2022.
  12. Member of DUGC of the Department w.e.f. August 2018 to October 2020.
  13. DFSC Member (for Asst. Prof.) w.e.f. December 2021 to March 2023.
  14. Member of Academic Council w.e.f. January 2011 to January 2014.
  15. Associate In-charge, Telephone Systems, Telecom Centre w.e.f. February 2012 to March 2017.
  16. Member of DPAC & TAC of Telecom Centre w.e.f. February 2012 to March 2017.
  17. Departmental coordinator of TEQIP-II Project w.e.f. April 2011 to March 2017.
  18. Engaged in several administrative activities as allotted by HoD time to time.
  19. Co-coordinator of Tech Fest “CONCETTO–2013”.
  20. Faculty Advisor for JRF of the Department w.e.f. September 2012 to December 2020.
  21. Faculty In-charge of the Department.
  22. Teacher in-charge, Electrical Engineering Society w.e.f. July 2011 to December 2021.
  23. Treasurer, Electrical Engineering Society w.e.f. July 2009 to June 2011.
  24. External member of DPAC & TAC in Central Workshop w.e.f. October 2013 to July 2018.
  25. Member of “Stage Management & PA System” for Convocation w.e.f. 2008 to 2018.
  26. Member of “Stage Preparation & Lighting Committee” of CONCETTO, IMC, III & BASANT.
  27. Teacher Advisor for students (Anti-ragging squad member).
  28. Chairperson and member of DSC from the Department till date.
  29. External member of DSC from sister Department till date.
  30. External member of DPAC and TAC in Centre of Renewable Energy.
  31. Laboratory In-charge of Analog Electronics, Digital Electronics and Mine Electrical Tech. Labs.
  32. Coordinator of Basics of Electrical Engineering (EEI101).
  33. Member of the moderation board of M. Tech. (PSE).
  34. Coordinator of 3-Yrs. M. Tech. (PEED), IIIF, New Delhi.
  35. Chairman & member of some Departmental purchase files.
  36. DRC member of the Department.

Guidance

Ph.D. Thesis Supervised: Sixteen (16) Nos. from IIT (ISM), Dhanbad

1)

“Security Constraints based Economic Operation in Large-Scale PV Integrated Power Networks” – by Ms. Deepti Singh, (Awarded in July’ 2023); Supervisor: Prof. Nitai Pal and External Supervisor: Prof. Sunil Kumar Sinha, Dept. of Electrical Engineering, KNIT Sultanpur, UP.

2)

“Comprehensive Analysis of Voltage Sag Assessment, Data Analysis and Mitigation Strategies in Power Systems” – by Mr. Jagannath Patra (Awarded in June’ 2023); Supervisor: Prof. Nitai Pal.

3)

“Artificial Intelligence and Blockchain Aided Smart Grid for Better Energy Management” – by Mr. Manish Kumar, (Awarded in February’ 2023); Supervisor: Prof. Nitai Pal and External Supervisor: Prof. Mukesh Singh, Dept. of E&I, TIET, Patiala, Punjab.

4)

“Optimal Allocation of DG for Resilient Electrical Distribution Grid” – by Ms. Monika Yadav, (Awarded in January’ 2023); Supervisor: Prof. Nitai Pal and External Supervisor: Dr. Devender Kumar Saini, Electrical Cluster, UPES, Dehradun.

5)

“Technical Investigation on the Performance of Solar Photovoltaic System for Remote Indian Regions” – by Mr. Nimish Kumar (Awarded in September’ 2022); Supervisor: Prof. Nitai Pal.

6)

“Optimal Planning and Management of Renewable Integrated Hybrid Energy System” – by Mr. Ashiwani Yadav (Awarded in June’ 2022); Supervisor: Prof. Nitai Pal.

7)

“Control Strategies for Standalone Distributed Energy Systems” – by Mr. Yaduvir Singh (Awarded in April’ 2022); Supervisor: Prof. Nitai Pal.

8)

“Unit Sizing and Cost Analysis for Standalone Wind and Photovoltaic Hybrid Energy System” – by Mr. Faizan Arif Khan (Awarded in April’ 2022); Supervisor: Prof. Nitai Pal and External Supervisor: Prof. Syed Hasan Saeed, Professor, Integral University, Lucknow.

9)

“Renewable Integrated Off-grid Sustainable Power Supply System for Remote Rural Areas” – by Mr. Pankaj Kumar (Awarded in September’ 2021); Supervisor: Prof. Nitai Pal.

10)

“Design of Nonlinear Controller for the Improvement of Power System Stability” – by Mr. Asim Halder (Awarded in July’ 2021); Supervisor: Prof. Nitai Pal and External Supervisor: Dr. Debasish Mondal, RCC Institute of Information Technology, Kolkata.

11)

“Sustainable Hybrid Off-grid Power Supply System for Remote Rural Area” – by Mr. Partha Sarothi Sikder (Awarded in June’ 2018); Supervisor: Prof. Nitai Pal.

12)

“Energy Management and Control Strategies of Off-Grid Solar-Wind Hybrid Power Generation System” – by Mr. Himanshu Sharma (Awarded in December’ 2017); Supervisor: Prof. Nitai Pal.

13)

“Design of an Energy Efficient Lighting System Using Solar Photovoltaic Cell” – by Ms. Nibedita Das (Awarded in September’ 2016); Supervisor: Prof. Nitai Pal.

14)

“Communication and Emergency Lighting for Mines Under Disaster Conditions” – by Mr. S. Vamsi Krishna (Awarded in November’ 2015); Supervisor: Prof. Nitai Pal.

15)

“Some Studies on High Frequency Resonant Inverter Based Induction Heater and the Choice of Secondary Metallic Objects” – by Mr. Atanu Bandyopadhyay (Awarded in April’ 2013); Supervisors: Prof. Nitai Pal and Prof. P. K. Sadhu.

16)

“Some Studies on Energy Efficient Induction Heater” – by Ms. Dola Sinha (Awarded in February’ 2013); Supervisors: Prof. Nitai Pal and Prof. P. K. Sadhu.
Copyright © 2025 All Rights Reserved || Designed & Developed by - WEBSTEP TECHNOLOGIES PRIVATE LIMITED