(1) Prof. Aditi sengupta:
(2) Prof. Ajay Bhandari:
Sl. No. |
Name of PI/Co-PI etc. |
Funding Agency |
Title |
1 | Prof. Ajay Bhandari | Science and Engineering Research Board (DST-SERB) under Start up research grant (SRG) | Investigation of Human Retinal Vasculature for early prognosis of microaneurysm regions. |
2 | Prof. Ajay Bhandari | Indian Institute of Technology (Indian School of Mines), Dhanbad | Investigation of Effect of Nasal Septum Deviation on Nasal Airflow Obstruction using Computational Fluid Dynamics and 3D Printing for Septoplasty Planning. |
(3) Prof. Ajit kumar:
Sl. No. |
Name of PI/Co-PI etc. |
Funding Agency |
Title |
Sanctioned Amount (INR) |
1. |
Dr. Ajit Kumar (PI) |
MHRD, Govt. of India |
Smart India Hackathon 2022 Project Code: MHRD(SIH)/2022-2023/05/INSTITUTE |
6,72,000 |
2. |
Dr. Ajit Kumar (PI) |
DST (SERB) |
High-End Workshop on Intelligent Mobile Hydraulics and Advanced Automation for Improved Motion Control of Off-highway Vehicles Project Code: DST(SERB)(WORKSHOP)/2022-2023/01/MECH |
5,00,000 |
3. |
Dr. Ajit Kumar (PI) |
TEQIP II, MHRD |
Improving Energy Efficiency by Analysis of Potential Energy Regeneration in Hydraulic System of Heavy-Duty Vehicles |
1,99,500 |
4. |
Prof. K. Dasgupta (PI) Dr. Niranjan Kumar (Co-PI) Dr. Jayanta Das (Co-PI) Dr. Ajit Kumar (Member, PIG) |
DST (FIST) |
Up gradation of Power Hydraulic and Pneumatics Lab |
165 Lakh |
(4) Prof. Amit Rai Dixit:
Sl. No. |
Name of PI/Co-PI etc. |
Funding Agency |
Title |
1 | PI- Prof. Amit Rai Dixit | ANSP DRDO | Design, development, and supply of special-purpose equipment for the cutting of composite hardware |
2 | Co-PI- Prof. Amit Rai Dixit | DRDL Hyderabad | Formability study of Ti-6Al-4V alloy and its surface characteristics |
3 | Co-PI- Prof. Amit Rai Dixit | DRDL Hyderabad | Study, Investigation, and Development of Machining parameters of FRP composites using Laser to Maintain better surface Integrity |
4 | PI- Prof. Amit Rai Dixit | Department of Science and Technology, NEW DELHI | Current status, enablers and barriers of implementation of cellular manufacturing system in Indian industries. |
5 | Co-PI- Prof. Amit Rai Dixit | Department of Science and Technology | Modernization of Manufacturing Facilities vis-a-is Improvement in quality teaching and research. (FIST) |
(6) Prof. Amitava Mandal:
Sl. No. |
Name of PI/Co-PI etc. |
Funding Agency |
Title |
1 | Prof. Amitava Mandal | The Science & Engineering Research Board (SERB), Govt. of India. | Development of a New Strategy to Enhance Cylindrical Wire Electrical Discharge Turning Process. |
(7) Prof. Kalyan Kumar Singh:
Sl. No. |
Name of PI/Co-PI etc. |
Funding Agency |
Title |
Sanctioned Amount (INR) |
Date of commencem ent of the project |
Date of completion of the project |
IIT(ISM) Project No. |
1 | Prof. Kalyan Kumar Singh | UGC NEW DELHI | Wear & Friction Study of Nano Composites |
6.85 Lakhs | 25-03-2013 | 31-03-2016 | UGC letter No. F. No. 42- 899/2013 (SR) |
2 | Prof. Kalyan Kumar Singh | Ministry of Coal, Govt. of India. |
Design and Development ofKnee and Spinal Smart Protective Devices for Improving the Health and Safety of Miners. | 72.06 Lakhs | 15-11-2021 | 31-12-2024 | CIL(18)/2021-2022/830/Mech |
(8) Prof. Madan Lal Chandravanshi:
Sl. No. |
Name of PI/Co-PI etc. |
Funding Agency |
Title |
Sanctioned Amount (INR) |
Year |
1 | Prof. Madan Lal Chandravanshi |
DST |
Diagnosis of a Vibrating Structural failure through Modal Analysis |
Rs17.03 Lakh |
2013 - 2017 |
(9) Prof. Niranjan Kumar:
Sl. No. |
Name of PI/Co-PI etc. |
Funding Agency |
Title |
Sanctioned Amount (INR) |
1. |
Prof. K. Dasgupta (PI) Dr. Niranjan Kumar (Co-PI) & other 5 Co-CI |
HEC Ranchi |
Design, development and vetting of 5 cum. Hydraulic Excavator. CONS/3637/17-18
|
64,90,000 |
2. |
Prof. Som Nath Saha (PI) Prof. Sanjay Singh(Co-PI) Prof. Ajit Kumar(Co-PI) Prof. Niranjan Kumar(Co-PI) |
TEQIP-CPIU (CRS Scheme) |
Design and development of a solar-powered hydraulically boosted three-wheeled passenger vehicle. |
15,47,000 |
3. |
Dr. Niranjan Kumar (PI) |
TEQIP II, MHRD |
Design of Energy Efficient Hydraulic System Incorporating Accumulator along with Pressure Intensifier. |
2,73,000 |
4. |
Prof. K. Dasgupta (PI) Dr. Niranjan Kumar (Co-PI) Dr. Jayanta Das (Co-PI) Dr. Ajit Kumar (Member, PIG) |
DST (FIST) |
Up gradation of Power Hydraulic and Pneumatics Lab Project Code: DST(FIST)(228)/2019-2020/642/MME |
1,65,00,000 |
(10) Prof P K Mahato:
Sl. No. |
Name of PI/Co-PI etc. |
Funding Agency |
Title |
Sanctioned Amount (INR) |
Date |
1 | Prof P K Mahato | DST | Active modal vibration control of composite structure | 27.1 Lac | 01Dec2014 to 30Nov2017 |
2 | Prof P K Mahato | DST | Model updating and aeroelastic analysis of delaminated aircraft structure | 46:8 Lac | 29Jun2019 to 28Dec2022 |
(11) Prof. R. N. Hota:
Sl. No. |
Name of PI/Co-PI etc. |
Funding Agency |
Title |
Sanctioned Amount (INR) |
1. |
Prof. R. N. Hota (PI) Prof. S. Narayanan (Co-PI) |
GTRE (DRDO) |
Design and fabrication of an experimental facility for measurement of acoustic impedance of afterburner screech liner |
99.50 Lakhs |
2. |
Prof. R. N. Hota (Co-PI) Prof. S. Narayanan (PI)
|
DST (SERB) |
On the reductions of aerofoil-turbulence noise by wavy edges |
33.44 Lakhs |
Sl. No. |
Name of PI/Co-PI etc. |
Funding Agency |
Title |
Sanctioned Amount (INR) |
(4) Prof P K Mahato:
Sl. No. |
Name of PI/Co-PI etc. |
Funding Agency |
Title |
Sanctioned Amount (INR) |
Date |
1 | Prof P K Mahato | DST | Active modal vibration control of composite structure | 27.1 Lac | 01-12-2014 to 30-11-2017 |
2 | Prof P K Mahato | DST | Model updating and aeroelastic analysis of delaminated aircraft structure | 46:8 Lac |
29-Jun-2019 to 28-Dec-2022 |
(3)Prof. Sarthak S. Singh:
Completed research: (Sponsored research which is completed in the last 3 years: Title, Funding agency, PI)
Sl. No. |
Name of PI/Co-PI etc. |
Funding Agency |
Title |
Sanctioned Amount (INR) |
1. |
Sarthak S. Singh (PI) |
DST (SERB) |
Investigation of the spall behavior of glass-filled epoxy composites using laser spallation technique |
29.97 lakhs |
2. |
Sarthak S. Singh (PI) Kesavan Ravi (Co-PI) |
DLJ (DRDO) |
Formulation of spray technique for sand crust (composite) with binder solutions and laboratory testing of sand crust |
7.46 lakhs |
(4) Prof. Subrata Ghosh
Sl No |
Title of the Project |
Sanctioning Authority |
Amount (Rs) |
Time Period and Duration |
Status |
Role |
1 |
Design and deployment of Ventilation Fan Wind Power Recovery System as an alternate source of Electrical Energy in Underground Coal Mines” |
CIL |
66,70,000/- |
08.02.2021 – 07.02.2024 3 years |
Completed |
Co-PI |
2 |
Collaborative work for laboratory study on nano-lubrication in hot rolling |
SAIL |
6,49,000/- |
03.09.2022 – 02.07.2023 10 months |
Completed |
PI |
() Prof. Vivek bajpai:
Development of modular type high speed ultra-precision machining center from DST.