| Area | PhD Scholar Details | Supervisor Details | |
| High performance computing of transition to turbulence for multiphysical flows | Bhavna Joshi (21DR0067) | Prof. Aditi Sengupta (Main) | |
| Application of net zero carbon fuels in multiphysical applications | Arjun Gond (22DR0287) | Prof. Aditi Sengupta (Main) | |
| Data-driven modelling of transition to turbulence and flow control | Sanjeev Kumar (23DR0148) | Prof. Aditi Sengupta (Main) | |
| Direct numerical simulations of disturbance environments in a low pressure turbine T106A cascade | Priya Pal (24DR0136) | Prof. Aditi Sengupta (Main) | |
| Investigation of Nasal Septal Deviation and Implications of Virtual Septoplasty: An Image-based Numerical and Experimental Analysis | Kartika Chandra Tripathy (20DR0061) | Prof. Ajay Bhandari (Main) | |
| Computational and Experimental Investigation of Ophthalmic Artery Aneurysms: Enhancing Diagnostic Approaches and Insights | Gautam Kumar (23DR0246) | Prof. Ajay Bhandari (Main) | |
| Experimental and Numerical investigation of obstructive sleep apnea | Anjay Kumar (24DR0032) | Prof. Ajay Bhandari (Main) | |
| Design and Development of an Energy-Efficient Hydraulic Drive Unit of a Chair Lift Man Riding System | Shatrughan Thakur (20DR0131) | Prof. Ajit Kumar (Main) + Prof. Apurna Ghosh, Curtin University, Australia (Co-Guide) + Prof. Ping Chang, Curtin University, Australia (Co-Guide) | |
| Performance Investigation of a Novel Energy Regenerative Technology for Hydraulic Excavator Machine | Shubhyanshu Singh (20DR0135) | Prof. Ajit Kumar (Main) | |
| Numerical and Experimental Investigation on Application of Dual Spool Valve Controlled Hydraulic Actuator System for Enhancing Its Operational Efficiency | Sumit Kumar (21DR0195) | Prof. Ajit Kumar (Main) | |
| Digital hydraulics | Manoranjan Jena (23DP0064) | Prof. Ajit Kumar (Main) | |
| Hydraulics and Tribology | Sasmita Singh (24DP0111) | Prof. Ajit Kumar (Main) + Prof. Subrata K. Ghosh (Co-Guide) | |
| Naresh Prasad Choudhry (18DP0017) | Prof Alok Kumar Das (Main) + Prof. P. K. Singh (Co-Guide) | ||
| Kumar Ujjwal (19DR0076) | Prof Alok Kumar Das (Main) + Prof Raman Singh (Co-Guide) | ||
| Gaurav Parmar (21DR0054) | Prof Alok Kumar Das (Main) | ||
| Wire Arc Additive Manufacturing (WAAM) | Raushan Kumar (22DR0189) | Prof. Alok Kumar Das (Main) + Prof. Rahul MR (Co-Guide) | |
| Surface modification through cold spray coating | Sonu Kumar (23DR0322) | Prof. Alok Kumar Das (Main) + Prof. Prof. Keshavan Ravi (Co-Guide) | |
| Methods for form correction of WAAM printed components | Peeraj Mazumder (24DR0118) | Prof. Alok Kumar Das (Main) + Prof. Amit Rai Dixit (Co-Guide) | |
| Micromachining through EDM | Prashant Kumar Bhatiya (24DP0235) | Prof. Alok Kumar Das (Main) + Prof. Abhijeet Sethi (Co-Guide) | |
| Recycling and reuse of polymer-based 3D-printed waste | Prem Prakash Nagda (24DP0236) | Prof. Alok Kumar Das (Main) + Prof. Abhijeet Sethi (Co-Guide) | |
|
(To be decided) |
Manish Malpani (24DP0031) | Prof. Alok Kumar Das (Main) | |
| (To be decided) | Deepak Kumar Sethy (24DP0025) | Prof. Alok Kumar Das (Main) | |
| Node Generation in Structures without Vibration Absorbers | Sunil Kumar Singh (23DR0183) |
Prof. Aman Kumar (Main) + Prof. Sanjoy Ghoshal (Co-Guide) |
|
| (To be decided) | Ranjeet Kumar (24DR0145) | Prof. Aman Kumar (Main) | |
| Modern Control of Hydraulic Systems | Samit Kumar (23DR0306) | Prof. Aman Kumar (Main) + Prof. Sanjoy Ghoshal (Co-Guide) | |
| (To be decided) | Avinash Kumar (24DP0083) | Prof. Aman Kumar (Main) | |
| Optimizing the usage of coolant in Metal Cutting Operations: Efficiency and Environmental Considerations through Cutting Fluid Optimizer | Mahip Kumar Singh (17DP00293) | Prof. Amit R Dixit (Main) | |
| Additive texturing of metal parts using laser powder bed fusion process to improve surface functionality for biomedical applications | Saket Kumar (18DR0120) | Prof. Amit R Dixit (Main) | |
| Print Fidelity and Performance Evaluation of Polymer Composite using Additive Manufacturing Process | Annada Prasad Moharana (20DR0017) |
Prof. Amit R Dixit (Main) | |
| Mechanical characterization of lattice structure of 316L SS fabricated by laser powder bed fusion | Deepak Kumar (21DR0046) | Prof. Amit R Dixit (Main) | |
| Extrusion based additive manufacturing of advanced ceramics materials and characterization | Subham Kumar Pandey (21DR0189) | Prof. Amit R Dixit (Main) | |
| Simulation Analysis and Post-Processing Strategies in Laser-Powder Bed Fusion Fabricated Components | Pratik Shaw (22DR0178) | Prof. Amit R Dixit (Main) | |
| Water jet machining | Piyush Kumar (23DR0103) | Prof. Amit R Dixit (Main) + Prof. S. Narayanan (Co-Guide) | |
| Performance Assessment of Polymer Composites in Additive Manufacturing | Anup Kumar Jana (24DR0036) | Prof. Amit R Dixit (Main) | |
| Experimental investigation and parametric optimization of Electro-discharge machining of composite materials | Tapas Chakraborty (17DP000186) | Prof. Amitava Mandal (Main) | |
| Parametric study and characterization of product made by WAAM process | Vishal Kumar (19DR0172) | Prof. Amitava Mandal (Main) | |
| Laser Powder Based Fusion Additive Manufacturing | Manchu Mohan Krishna Sai (21DR0091) | Prof. Amitava Mandal (Main) | |
| Fabrication of user-defined in-situ alloys via double-wire arc additive manufacturing (D-WAAM) using machine learning (ML) approach | Md Sajid Hussain (22DR0124) | Prof. Amitava Mandal (Main) | |
| Additive Manufacturing of High Entropy Alloy for Bioimplant Applications | Reyazul Warsi (23DR0134) | Prof. Amitava Mandal (Main) + Prof. Alok Das (Co-Guide) | |
| Manufacturing | Arnab Kanrar (24DP0278) | Prof. Amitava Mandal (Main) | |
| Robotics | Ashish Siddharth (20DR0175) | Prof. Arun Dayal Udai (Main) + Prof. Ajay Bhandari (Co-Guide) | |
| Robotics | Indramani (20DR0052) | Prof. Arun Dayal Udai (Main) + Prof. Zafar Alam (Co-Guide) | |
| Robotics | Himanshu Varshney (21DR0061) | Prof. Arun Dayal Udai (Main) + Prof. Zafar Alam (Co-Guide) | |
| Impact of drops | Somen Kumar Dutta (21DR0183) | Prof. Deepak Kumar Mandal (Main) | |
| Impact of drops | Ravi Ranjan Singh (22DR0200) | Prof. Deepak Kumar Mandal (Main) | |
| Impact of drops | Md Sirajullah (23DR0076) | Prof. Deepak Kumar Mandal (Main) | |
| Condition monitoring and fault diagnosis of fluid power system | Manish Kumar Barnwal (18DP000376) | Prof. Jayanta Das (Main) + Prof. Sanjoy K. Ghoshal (Co-Guide) | |
| Advanced coordinated hydraulic control using combined design of swash plate control of main pump and speed control strategy of prime mover to simultaneously achieve high accuracy and high efficiency | Jayant Alfred Joseph Ekka (20DR0055) | Prof. Jayanta Das (Main) | |
| Reducing flow rate pulsation in hydraulic system by active control of accumulator | Naveen Kumar (20DR0082) | Prof. Jayanta Das (Main) | |
| Intelligent fault identification and control algorithm for twin motor hydrostatic drive | Rakesh Kumar Nayak (21DR0141) | Prof. Jayanta Das (Main) | |
| Micro welding parameter optimization through synchronized robotic movement | Priyanshu Kumar (22DR0317) | Prof. Jayanta Das (Main) + Prof. Teresa Zielinska (Co-Guide) | |
| (To be decided) | Jitendra Kumar Vishwakarma (23DR0251) | Prof. Jayanta Das (Main) | |
| Airfoil noise reductions through novel dimples | Mithilesh (23DR0077) | Prof. Kabilan B (Main) + Prof. S. Narayanan (Co-Guide) | |
|
Hemant Priyadarshi (22DR0090) |
Prof. Kalyan K. Singh (Main) | ||
|
Appu Kumar (23DR0226) |
Prof. Kalyan K. Singh (Main) | ||
|
Kshitiz Shukla (24DR0322) |
Prof. Kalyan K. Singh (Main) | ||
|
Design and development of efficient rock cutting technology |
Hemant Kumar (21DR0059) | Prof. L. A. Kumaraswamidhas (Main) | |
|
Design and development of new ventilated operator seat |
Janathul Basha (22DR0170) | Prof. L. A. Kumaraswamidhas (Main) | |
|
Estimation of Heat Generated in the Shank Part of Vibrating Ripper. |
Sandeep Kumar (23DP0087) | Prof. L. A. Kumaraswamidhas (Main) | |
| Experimental Investigation of Reprocessed Thermoplastic Acrylonitrile Butadiene Styrene | Anbalagan Palaniraj (24DP0022) | Prof. L. A. Kumaraswamidhas (Main) | |
|
An automatic power-shift transmission with improved Performance Characteristics and driveline efficiency for Off-Highway Rear Rigid Dump Truck |
Jeyakumar S (24DP0029) | Prof. L. A. Kumaraswamidhas (Main) | |
| Improvement of the thermal efficiency of electric cooling with liquid cooling technologies |
Shyam Sundar Tallada (24DP0043) | Prof. L. A. Kumaraswamidhas (Main) | |
| CO2 Emissions reduction with optimized designs in automotive sector | Suresh Naidu Reddy (24DP0047) | Prof. L. A. Kumaraswamidhas (Main) | |
| Investigations on Manufacturing of Non-circular Gears and their Characterization | Sandeep Gour (24DP0041) | Prof. L. A. Kumaraswamidhas (Main) | |
| Assessment of Rock mass rippability through geotechnical investigation for selection of suitable equipment for blast free mining |
Braj Binod Kumar (24DP0087) | Prof. L. A. Kumaraswamidhas (Main) | |
| Conditional monitoring of mechanical faults in electrical Rope Shovels using AI techniques | Abhinav Badal Soren (24DP0077) | Prof. L. A. Kumaraswamidhas (Main) | |
| Development and Characterization of Sterculia Foetida Shell Particle and Kenaf Fiber Reinforced Novel Hybrid Polymeric Composite for Automotive Application |
Sathish Kumar R (24DP0188) | Prof. L. A. Kumaraswamidhas (Main) | |
| Investigating the impact of Material surface finish on the performance and cleanability in a Single-use Bioreactor | Shivakumar S (24DP0115) | Prof. L. A. Kumaraswamidhas (Main) | |
| Optimization of Hydrogen-Enriched Alternate Fuels for Sustainable CI Engine Technology |
Deena Dayala Sharma G (24DR0320) | Prof. L. A. Kumaraswamidhas (Main) | |
| Experimental and Simulated studies of Surface Roughness due to Vibration Effects in Single Point Diamond Turning (SPDT) | Manish Kumar Rajak (22DR0121) | Prof. Madan Lal Chandravanshi (Main) | |
| Nonlinear Structural Analysis and parametric optimization of Sandwich Composite Panel under Hygro-Thermo Mechanical | Mrityunjay Kumar (19DR0090) |
Prof. Madan Lal Chandravanshi (Main) + Prof. Vishesh Kar, NIT Jamshedpur (Co-Guide) | |
| Fault diagnosis and prediction of remaining useful life of wire rope | Paresh Kumar Mishra (20DR0092) | Prof. Madan Lal Chandravanshi (Main) +Prof. Mousumi Mallick, CSIR-CIMFR, Dhanbad (Co-Guide) | |
| Enhancing the performance parameters of hydraulic hoses used in HEMM. | Amit Kumar (20DR0011) | Prof. Niranjan Kumar (Main) | |
| Design and investigation of zero-turning radius wheeled mobile robot for on-road and off-road applications | Murshid Ansari (22DR0136) |
Prof. Niranjan Kumar (Main) + Dr. Shubhashisa Sahoo, Scientist âFâ, DRDO (Co-Guide) |
|
| (To be decided) | Rahul Ranjan (23DP0079) |
Prof. Niranjan Kumar (Main) + Dr. Sreeharsha R (Co-Guide) |
|
| (To be decided) | Virendra Singh Choudhary (24DP0120) | Prof. Niranjan Kumar (Main) + Dr. Vijay V. Patel, ADA, DRDO (Co-Guide) | |
| (To be decided) | Sonu Kumar Suman (24DR0179) |
Prof. Niranjan Kumar (Main) + Prof. Subrata Kumar Ghosh (Co-Guide) |
|
| Discharge characterization and its utilization to improve stability by implementing novel EDM variants | Rajesh Sahoo (19DR0119) | Prof. Nirmal K. Singh (Main) + Prof. Vivek Bajpai (Co-Guide) | |
|
Investigation of Friction Surface Coating On Medium Carbon Steel for Mining Equipment |
Hemlata Jangid (21DR0060) | Prof. Nirmal K. Singh (Main) | |
| Approaches to enable Laser bed fusion process affordable and sustainable | Rashmi Priya Parida (21DR0143) | Prof. Nirmal K. Singh (Main) +Prof. Amitava Mandal (Co-Guide) | |
| Maglev-EDM | Anand Kumar (21DR0013) | Prof. Nirmal K. Singh (Main) + Prof. Vivek Bajpai (Co-Guide) | |
| Manufacturing/welding | Pawan Prakash (23DR0102) |
Prof Nirmal K. Singh (Main) + Prof. Somnath Chattopadhyaya (Co-Guide) + Prof Vibekananda Dutta, WUT Poland (Co-Guide) |
|
| Microfluidics and acoustics (Acoustofluidics) | Ankit Kumar (21DR0024) | Prof. Pawan Kumar Singh (Main) + Prof. S. Narayanan (Co-Guide) | |
| Aeroelastic analysis of variable stiffness laminated composite structure | Pritam Mandal |
Prof. P. K. Mahato (Main) |
|
| Dynamic and aeroelastic Analysis of Box-beam using Lagrange polynomial | Ashutosh Kumar | Prof. P. K. Mahato (Main) | |
| Evaluation of Mechanical behavior of Novel hip implant: Numerical and experimental investigation | Avik Chowdhury | Prof. P. K. Mahato (Main) + Dr. B. Paul, IIEST, Shibpur (Co-Guide) | |
| Active control of Thermoacoustic Instability through Acoustic Driven Fuel Injector Inside a Combustor | Nitish Kumar Sah (22DR0313) | Prof. Rabindra Nath Hota (Main) + Prof. Sanjay K. Ghoshal (Co-Guide) | |
| Thermal Engineering | Ankit Kumar (18DR0031) | Prof. Rakesh Kumar (Main) | |
| Thermal Engineering | Saurav Kumar Chakravarti (19DR0138) | Prof. Rakesh Kumar (Main) | |
| Thermal Engineering | Uttam Kumar (21DR0210) | Prof. Rakesh Kumar (Main) | |
| Thermal Engineering | Kumar Shambhav (22DR0107) | Prof. Rakesh Kumar (Main) + Prof. Somnath Chattopadhyaya | |
| Thermal Engineering | Ashish Kumar (22DR0062) | Prof. Rakesh Kumar (Main) | |
| Fault detection in bearings and gearboxes using zero frequency filter and wavelet transform-based algorithms | Shruti Sachan (17DR000292) | Prof. Sachin K Singh (Main) | |
| Fault detection of Rolling Element Bearing using Wavelet Analysis and Machine Learning | Pankaj Chauhan (20DR0091) | Prof. Sachin K Singh (Main) | |
| Detection of rotor faults using machine learning | Rambilas Das (24DR0143) | Prof. Sachin K Singh (Main) | |
| Multiphase Flows | Arindam Saha (22DR0023) | Prof. Sandipan Kumar Das (Main) | |
| (To be decided) | Niraj Kumar (23DR0270) | Prof. Sandipan Kumar Das (Main) | |
| (To be decided) | Pravin Pranav (24DR0129) | Prof. Sandipan Kumar Das (Main) | |
| Signal processing | Debashish Nanda (18DR0053) | Prof. Sanjoy K. Ghoshal (Main) | |
| Heat and mass transfer study on adsorption-based hydrogenous gas storage systems | Anupam Chaudhary (20DR0173) | Prof. Satyabrata Sahoo (Main) | |
| Carbon capture and storage | Aditya Singh (21DR0010) | Prof. Satyabrata Sahoo (Main) | |
| Adsorption-based refrigeration systems | Md. Shahid Nadeem (24DR0098) | Prof. Satyabrata Sahoo (Main) | |
| Modeling and Analysis of Horizontal Axis Hydrokinetic Turbine |
Mahesh Kumar Pandey (22DR0119) |
Prof. Shibayan Sarkar (Main) + Prof. Mamdud Hossain, Robert Gordon University, Aberdeen, UK (Co-Guide) |
|
| Turbomachinery |
Saumitra Kumar Sharma (24DR0168) |
Prof. Shibayan Sarkar (Main) | |
| Turbomachinery |
Tinkaj Rana (24DR0211) |
Prof. Shibayan Sarkar (Main) | |
| Turbomachinery | Vijay Kumar Chaudhary | Prof. Shibayan Sarkar (Main) | |
|
Energy efficiency improvement in FSW joining |
Ankita Mistry (21DR0025) | Prof. Somnath Chattopadhyaya (Main) + Prof. Suman Saha (Co-Guide) | |
| Vibration Monitoring | Abhishek Kumar (22DR0036) | Prof. Somnath Chattopadhyaya (Main) | |
| Maraging Steel Welding | Kuna Venkatesh Rao (22DR0015) | Prof. Somnath Chattopadhyaya (Main) | |
| Friction Stir welding | Gautam Chandra Krar (17DP000212) | Prof. Somnath Chattopadhyaya (Main) | |
| Reliability Engineering | Kartik Bhushan (18DP000381) | Prof. Somnath Chattopadhyaya (Main) | |
| 3D Printing of Anntena | Jaya Kori (21DR0064) | Prof. Somnath Chattopadhyaya (Main) | |
| Tunneling | Biswaraj Dash (18DR0012) | Prof. Somnath Chattopadhyaya (Main) + Prof. VMSR Murthy (Co-Guide) | |
| Digital Twin | Malolan Vasudevan (23DP0062) | Prof. Somnath Chattopadhyaya (Main) + Prof. Gauri Shankar Murti (Co-Guide) | |
| Non Traditional Mfg | Shamik Ghosh (24DP0112) | Prof. Somnath Chattopadhyaya (Main) | |
| Non Traditional MFG | Debajyoti Mukherjee (24DP0225) | Prof. Somnath Chattopadhyaya (Main) | |
| EDM | Manish Upreti (23DP0063) | Prof. Somnath Chattopadhyaya (Main) + Prof. Ravi Kumar (Co-Guide) | |
| Submerged Arc Welding | Sagar Murmu (23DP0005) | Prof. Somnath Chattopadhyaya (Main) | |
| EDM | Vinod Kumar (23DP0107) | Prof. Somnath Chattopadhyaya (Main) + Prof. Ravi Kumar (Co-Guide) | |
| Evaporation of twin drops and spray atomization: Acoustic streaming effects | Aadil Kureshee (20DR0001) | Prof. S. Narayanan (Main) + Prof. Deepak Kumar Mandal (Co-Guide) | |
| Control of airfoil noise through wavy leading and traing edge serrations | Aadit Narayanmurthy (21DR0001) | Prof. S. Narayanan (Main) + Prof. Swagata Bhaumik (Co-Guide) | |
| Spray-acoustic interaction | Kasif (24DR0084) | Prof. S. Narayanan (Main) | |
| Battery Thermal Management System | Harshit Pandey (22DR0096) | Prof. Subrata Ghosh (Main) | |
| Wind Turbine | Yashwant Kr. Singh (22DR0274) | Prof. Subrata Ghosh (Main) | |
| Nano-lubricant in Hot Rolling Process | Ritesh Kr. Patel (23DR0207) | Prof. Subrata Ghosh (Main) | |
| Heat Exchanger | Swaraj Aditya (24DP0119) | Prof. Subrata Ghosh (Main) | |
| Renewable Energy | Rahul Kumar (24DP0103) | Prof. Subrata Ghosh (Main) | |
| Tribology | Equbal Hassan (23DP0052) | Prof. Subrata Ghosh (Main) | |
| Cooling System in IC Engine | Amitesh Kumar (24DR0315) | Prof. Subrata Ghosh (Main) | |
| Vortex-induced vibrations near a wall | Himalaya Sarkar (19DR0059) | Prof. Subhankar Sen (Main) | |
| Flow around stationary and vibrating two objects | Aman Raj (23DR0312) | Prof. Subhankar Sen (Main) | |
| (To be decided) | Subrata Mukherjee (23DP0101) | Prof. Subhankar Sen (Main) | |
| (To be decided) | Prasann Niranjan (24DR0124) | Prof. Subhankar Sen (Main) | |
| Micro-machining of graphite | Shiv Nath Rajwar (23DR0313) | Prof. Suman Saha (Main) | |
| Sustainable drilling | Rajesh Kumar (24DP0182) | Prof. Suman Saha (Main) | |
| Cavitation-induced surface peening | Arindam Mukherjee (24DR0316) | Prof. Suman Saha (Main) | |
| Study of air-cooled battery thermal management system using novel methods of heat transfer enhancement | Rambabu Gupta (20DR0113) | Prof. Tanmay Dutta (Main) | |
| Numerical investigations of liquid-cooled battery thermal management system for performance optimization | Devesh Kumar (21DR0049) | Prof. Tanmay Dutta (Main) | |
| Design of a novel hybrid battery thermal management system for electric vehicles | Rahul Ranjan (23DR0124) | Prof. Tanmay Dutta (Main) | |
| Heat Transfer Enhancement in Latent Heat Storage Triple Tube Heat Exchanger |
Bhim Kumar Choure (21DR0039) | Prof. Tanweer Alam (Main) | |
| Experimental and Numerical Investigations of Geothermal Energy System | Anand Kumar (22DR0012) | Prof. Tanweer Alam (Main) | |
| Experimental and Numerical Investigation of Solar Powered Water Distillation System | Sarvjeet Kumar (23DR0153) | Prof. Tanweer Alam (Main) | |
| (To be decided) | Doctor Soren (24DR0073) | Prof. Tanweer Alam (Main) | |
| (To be decided) | Krishna Veni Nalluri (24DP0175) | Prof. Tanweer Alam (Main) | |
| (To be decided) | Mahmood Alam (24DP0176) | Prof. Tanweer Alam (Main) | |
| Simulation of Nanostructured CFRP Composites | Abhipsa Kar (22DR0005) | Prof. Vivek Bajpai (Main) | |
| Performance evaluation of inhouse developed Diamond turning machine with commercially available machine | Prince Anand (22DR0316) | Prof. Vivek Bajpai (Main) | |
| (To be decided) | Dhiraj Bajpai (23DR0241) | Prof. Vivek Bajpai (Main) | |
| Manish Kumar (20DR0072) | Prof. Zafar Alam (Main) | ||
| Shrushti Maheshwari (20DR0185) | Prof. Zafar Alam (Main) + Prof. Sarthak Singh (Co-Guide) | ||
| Moshahid Raza (21DR0109) | Prof. Zafar Alam (Main) + Prof. Arun Dayal Udai (Co-Guide) | ||